Connecting The Printer Power - FARGO electronics DTC300 Service Manual

Card printer

Hide thumbs Also See for DTC300:

Table of Contents

RESTRICTED USE ONLY

Connecting the Printer power

Follow this procedure. (Note: Do not connect the Printer's USB cable until prompted during

the Printer Driver installation.)

Plug the AC adapter power cable into the back of the Printer. See Display A.

Plug the wall power cable into the AC power adapter.

Plug the wall power cable into a standard 110VAC power outlet.

Display A – Shows back of Printer with AC power cable (below).

DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)

Fargo Electronics, Inc.

Table of Contents

Dtc400 Dtc300m