Using The Magnetic Encoding Tab (Dtc400/Dtc300/Dtc300M) - FARGO electronics DTC300 Service Manual

RESTRICTED USE ONLY
Using the Magnetic Encoding tab
(DTC400/DTC300/DTC300M)
Use this option only if the Printer has an optional Magnetic Stripe Encoding Module installed.
The following describes these options and the Printer's magnetic encoding process.
•
The Card Printer comes with either a high-coercivity factory-installed Magnetic Stripe
Encoding Module or a low-coercivity Module.
•
The Printer cannot encode both types of Magnetic Stripes interchangeably within the
same Printer.
Step Procedure
1 Select the Magnetic Encoding tab to display options for controlling the
Magnetic Stripe encoding process.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
Fargo Electronics, Inc.
6-50