Using The Ribbon Tension Option - FARGO electronics Persona M30e User Manual

RESTRICTED USE ONLY

Using the Ribbon Tension Option

Step Procedure
1 Use the Ribbon Tension option to increase the amount of tension (drag) on
the Ribbon during printing.
Enter a negative value to decrease the amount of tension that is placed on
the Ribbon during printing
OR
Enter a positive value to increases the amount of tension that is placed on
the Ribbon during printing.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.0)
Fargo Electronics, Inc.
6-107