Paper Position Not Suitable For Borderless Printing; Roll Paper Is Not Securely In Contact With Roll Holder - Canon iPF655 - imagePROGRAF Color Inkjet Printer User Manual

Messages regarding paper

Paper position not suitable for borderless printing.

Because paper expands or contracts depending on
the environment of use, it may become narrower or
wider than the supported width for borderless printing.
The paper is loaded askew.

Roll paper is not securely in contact with roll holder.

When the roll was loaded, the roll was not inserted
rmly all the way on the Roll Holder.
764 Error Message
Cause
Cause
Corrective Action
Press ▲ or ▼ to select Stop Printing, and then
press the OK button.
Use each type of paper only where the recommended
environmental conditions are met. For details on
environmental conditions for various paper, see the
Paper Reference Guide.
(→P.98)
Select None when you have set Detect Mismatch in
the Control Panel menu to Warning.
However, note that this error may affect the printing
quality.
Press ▲ or ▼ to select Fix Paper Position and
straighten the paper so that the edges are between
the ink grooves for borderless printing.
Insert the roll rmly until it touches the ange of the
Roll Holder.
(→P.105)
Select None when you have set Detect Mismatch in
the Control Panel menu to Warning.
However, note that this error may affect the printing
quality.
Press ▲ or ▼ to select Print With Border, and
then press the OK button to continue printing. The
document will be printed with a border.
Corrective Action
Follow these steps to reload the roll.
1.
Press the OK button and remove the roll holder
from the printer.
2.
Insert the roll rmly on the Roll Holder until it
touches the ange.
(→P.105)
3.
Load the Roll Holder in the printer.