Control Panel
GL2
Line
Settings
& Pen
Manager
56 Printer Parts
Setting Item
Enable merge
Pen
Select Palette
Setup
Dene Palette
Reset Palette
Smoothing
ThickenFineLines
AdjustFaintLines
Description, Instructions
Specify whether to merge or print over colors where
lines overlap.
Choose Off to print the second line over the rst.
Choose On to merge all overlapping colors.
As pen values, choose Software, Palette A, Palette
B, or Factory.
Choose Software to print according to software
settings. Choose Palette A or Palette B to print using
the value specied in Dene Palette.
Specify the Width, Color, and Line Attributes in
the palette Pen no.. Choose Factory to conrm the
values when Factory is selected in Select Palette.
In Line Attributes, choose No Setting or Circle
Setting as the processing for the ends and junctions
of lines.
•
If you choose No Setting
•
If you choose Circle Setting
Restore Dene Palette to the default palette settings.
Choose whether to print arcs as smooth curved lines
or as multiple connected line segments.
•
If you choose Software
Operation is determined by the application. If
nothing is specied by the application, the result is
as shown in the gure.
Note: By default, this is a 72-sided gure
•
If you choose Smooth
Select On to print ne lines more distinctly.
If ne lines are printed in colors that do not match
the colors of other shapes, selecting Off may help
produce the expected results. However, lines in some
colors may appear broken.