The Surface Of The Paper Is Dirty; The Back Side Of The Paper Is Dirty - Canon iPF655 - imagePROGRAF Color Inkjet Printer User Manual

Problems with the printing quality

The surface of the paper is dirty

The Paper Retainer is soiled.
You are using a paper that does not dry easily.

The back side of the paper is dirty

The Platen has become dirty after borderless printing
or printing on small paper.
The Platen has become soiled because you have set
Width Detection to Off in the Control Panel menu.
The Paper Retainer is soiled.
734 Troubleshooting
Cause
Cause
Corrective Action
Clean the Paper Retainer.
(→P.709)
In the Control Panel menu, set Roll DryingTime to
at least 1 min.
(→P.49)
When paper that does not dry easily is used for
printing, it may curl during printing and touch the
Output Tray.
In this case, in the Control Panel menu, set Scan
Wait Time to an option other than Off.
However, note that printing will now take longer.
(→P.49)
Corrective Action
Open the Top Cover and clean the Platen.
(→P.709)
Set Width Detection to On in the Control Panel
menu, and then open the Top Cover and clean the
Platen.
(→P.709)
Open the Top Cover and clean the Platen. After this,
manually advance the roll onto the Platen before
printing.
(→P.709)
(→P.127)
Clean the Paper Retainer.
(→P.709)