Access The Menu For Printhead Replacement - Canon iPF655 - imagePROGRAF Color Inkjet Printer User Manual

Printheads

Access the menu for Printhead replacement

Caution
•
When replacing the Printhead immediately after printing, wait a few minutes before replacing it. The
metal parts of the Printhead become hot during printing, and there is a risk of burns from touching
these parts.
Note
•
Prepare a new Ink Tank when ink levels are low.
•
Your hands may become dirty during Printhead replacement. Use the gloves provided with the new
Printhead for replacement.
1.
If the roll is not ejected because of the cutting method selected, cut it manually and remove it.
(→P.333)
2.
Clean inside the Top Cover. (→P.709)
3.
On the Tab Selection screen of the Control Panel, press ◄ or ► to select the Settings/Adj.
tab ( ).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
4.
Press the OK button.
The Set./Adj. Menu is displayed.
5.
Press ▲ or ▼ to select Maintenance, and then press the OK button.
6.
Press ▲ or ▼ to select Replace P.head, and then press the OK button.
Ink is now lled.
After about two minutes, a message is shown on the Display Screen instructing you to open
the Top Cover.
696 Maintenance