Canon iPF655 - imagePROGRAF Color Inkjet Printer User Manual page 70

Control Panel
Adjust Feed
Printer Priority
Adj. Fine Feed
Mainte- Head Cleaning
nance
Nozzle Check
Replace P.head
Repl. maint cart
Head Info
54 Printer Parts
Setting Item
Adj. Auto(OtherPaper)
Quality
Manual
Adjust Adjust- A:High
Length ment
B:
Print
Standard/
Draft
Change A:High
Settings
B:
Standard/
Draft
Description, Instructions
Specify this mode with paper not in the Paper
Reference Guide.
The printer prints and reads a test pattern for
automatic adjustment of the feed amount. Note that
this function takes more time and consumes more ink
than Auto(GenuinePpr).
(→P.676)
Use this mode with highly transparent media
or other paper for which Auto(GenuinePpr) or
Auto(OtherPaper) cannot be used.
Print a test pattern for adjustment of the feed amount
based on the type of paper.
(→P.678)
Print a test pattern for particular types of paper to
compensate for paper stretching or shrinkage, after
which you enter the amount of adjustment.
(→P.681)
Displayed when you have selected Feed Priority >
Adj. Priority > Print Length.
Adjustment relative to the amount of stretching or
shrinkage of the current paper.
Enter either the adjustment results from
AdjustmentPrint or the discrepancy that you
measured (as a percentage).
For paper that tends to stretch, increase the feed
amount by choosing a higher adjustment value. For
paper that tends to shrink, decrease the feed amount
by choosing a lower adjustment value.
Displayed when you have selected Feed Priority
> Adj. Priority > Automatic or Print Quality.
Fine-tune the feed amount manually during printing.
(→P.680)
Clean the Printhead. (→P.694)
Choose Head Cleaning A if printing is faint, oddly
colored, or contains foreign substances.
Choose Head Cleaning B if no ink is printed at all, or
if printing is not improved by Head Cleaning A.
Print a test pattern to check the nozzles.
When replacing the Printhead, choose Yes and follow
the instructions on the screen.
(→P.695)
Not displayed during a warning message that the
remaining Maintenance Cartridge capacity is low.
When replacing the Maintenance Cartridge, choose
Yes and follow the instructions on the screen.
(→P.701)
Indicates information about the printhead.