2.
On the Tab Selection screen of the Control Panel, press ◄ or ► to select the Settings/Adj.
tab (
).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
3.
Press the OK button.
The Set./Adj. Menu is displayed.
4.
Press ▲ or ▼ to select Adjust Printer, and then press the OK button.
5.
Press ▲ or ▼ to select Head Posi. Adj., and then press the OK button.
6.
Press ▲ or ▼ to select Auto(Standard) or Auto(Advanced), and then press the OK button.
A test pattern is printed for adjustment.
Adjustment is now nished if you have printed on a roll or a sheet of A2 size or larger.
7.
If you are printing on sheets smaller than A2 size for Auto(Advanced), a conrmation message
is displayed requesting you to continue printing. Press the OK button and follow the instructions
displayed.
Adjusting the Printhead
Adjustments for Better Print Quality 667