Canon iPF655 - imagePROGRAF Color Inkjet Printer User Manual page 75

Setting Item
System Keep Paper Size
Setup
TrimEdge Reload
Rep.P.head Print
Nozzle Check
Use RemoteUI
Reset PaprSetngs
Description, Instructions
Choose On to use the paper size setting as the basis
for printing instead of other settings. The margin
setting of the printer menu will be used instead of
the margin setting of the printer driver if the latter
is smaller, which may prevent text or images in the
margin from being printed.
Choose Off to give priority to margin settings. The
larger value is used if the margin specied in the
printer driver does not match the margin in the printer
menu
Specify whether to trim the leading edge of the
currently retracted roll when the roll is advanced. Cut
the edge if you are concerned about any marks left
on the roll when the roll is left in the retracted position.
Specify On to have rolls cut when printing begins after
Sleep mode or when the power is restored. Selecting
Automatic will trim the edge when the roll has been
in the retracted position for two days or more.
Choose On to have the printer automatically execute
the Advanced Adj. operations after you replace the
Printhead.
(→P.666)
In Frequency, specify the timing for automatic
checks of nozzle clogging. Choose Standard to have
the printer adjust the timing for checks based on the
frequency of nozzle use. Choose 1 page to check
once per page.
Select Warning > On to display warnings if the
nozzles clog during printing.
Choosing Off prohibits access from RemoteUI.
Settings can only be congured from the control
panel.
Restores settings that you have changed with Media
Conguration Tool to the default values.
Control Panel
Printer Parts 59