Chang�Ng The Type Of Paper - Canon iPF655 - imagePROGRAF Color Inkjet Printer User Manual

Changing the Type of Paper
Follow these steps to change the type of paper specied on the printer after you have loaded paper.
If you will continue using this type of paper later, selecting Keep Paper Type > On will save the time and effort of
conguring the media type setting when you load the paper again. The current media type settings before you
select On will be automatically selected at that time. (→P.113)
Important
•
For best printing results, the printer ne-tunes the feed amount for each type of paper. Be sure to select
the type of paper to use correctly before printing.
•
Because the printer ne-tunes the feed amount for each type of paper, the margins and the size of
printed images may vary depending on the type of paper used. If margins and the size of images are not
as you expected, adjust the paper feed amount.
(→P.674)
Changing the Type of Paper
Note
•
After you load a roll, the printer automatically shows a menu for selection of the type of paper on the
Display Screen. Select the type of paper and press the OK button.
If no barcode has been printed on the roll and you have set ManageRemainRoll to On, specify the roll
length after the type of paper. (→P.114)
1.
On the Tab Selection screen of the Control Panel, press ◄ or ► to select the Paper tab (
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2.
Press the OK button.
The Paper Menu is displayed.
3.
Press ▲ or ▼ to select Chg. Paper Type, and then press the OK button.
4.
Press ▲ or ▼ to select the type of paper loaded (Roll Paper or Cut Sheet), and then press
the OK button.
5.
Press ▲ or ▼ to select the type of paper loaded in the printer, and then press the OK button.
Note
•
For details on types of paper, see the Paper Reference Guide. (→P.98) By default, Plain Paper
is selected.
•
If you move the Release Lever, the setting automatically reverts to the previously selected paper.
•
Be sure to select the correct paper type. If this setting does not match the loaded paper, it may
cause feed errors and affect printing quality.
Choosing Paper for Printing
Enhanced Printing Options 197
).