Item
SMTP Server Address
Primary DNS Server Address
Secondary DNS Server
Address
DNS Host Name
DNS Domain Name
Multicast DNS Service Name
7.
Click OK to display the Network page.
Note
•
If you specify to congure the IP address using DHCP, BOOTP, or RARP, there must be a server that
supports such protocol running in the network.
•
If you specify to congure the IP address using DHCP, BOOTP, or RARP, the IP address obtained by this
method is used rst. If you cannot obtain the IP address, the address specied in IP Address is used.
•
It takes up to two minutes to determine whether DHCP, BOOTP, or RARP are available. We recommend
clearing check boxes of options you will not use.
•
If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS
servers, DNS host name, and DNS domain name in Primary DNS Server Address, Secondary DNS
Server Address, DNS Host Name, and DNS Domain Name, respectively.
Details
Specify the SMTP server's IP address.
You can also specify the SMTP server
domain name, if desired.
Specify the IP address of the primary
DNS server.
Specify the IP address of the secondary
DNS server.
Specify the printer host name, up to
63 characters (1-63 characters). Use
single-byte letters, numbers, and "-"
(hyphens). Do not use numbers or "-"
for the rst character or "-" for the last
character.
Specify the printer domain name, up
to 63 characters. Use single-byte
letters, numbers, "-" (hyphens), and "."
(periods). Do not use numbers, "-", or
"." for the rst character, or "-" or "." for
the last character.
Specify the printer's Multicast DNS
service name. (1-63 characters)
This name will be displayed when
Bonjour functions are used.
Network Setting
Default Setting
0.0.0.0
0.0.0.0
0.0.0.0
NB-18GBxxxxxxxxxxxx
blank
Canon iPFxxxx (xxxxxx)
Network Setting 573
Need help?
Do you have a question about the iPF655 - imagePROGRAF Color Inkjet Printer and is the answer not in the manual?
Questions and answers