Canon iPF655 - imagePROGRAF Color Inkjet Printer User Manual page 160

Handling sheets
Load paper in the desired position to start printing from
Follow these instructions to load paper at the desired starting position for printing when Width Detection
is Off.
1.
If you did not send a print job in advance, a menu for selection of the type of paper is displayed.
Press ▲ or ▼ to select the type of paper, and then press the OK button.
Note
•
If a print job was received before paper was advanced, the media type and size specied by the job
are shown on the Display Screen.
Thus, this screen is not displayed. Go to step 2.
2.
Width Detection OFF. OK to continue? is now shown on the Display Screen. Press ▲ or ▼ to
select Leave OFF, and then press the OK button.
3.
After a menu for selection of the paper size is displayed, press ▲ or ▼ to select the paper
size, and then press the OK button.
4.
Open the Top Cover and check the position where paper is loaded.
To start printing from the current position, close the Top Cover.
To reposition the paper, push the Release Lever back.
144 Handling Paper