Canon iPF655 - imagePROGRAF Color Inkjet Printer User Manual page 73

Setting Item
GL2 Process- Warning
Settings ing
Option
On-the-Fly
PageSizeProcess1
PageSizeProcess2
GL2 Set Print
Interface EOP Timer
Setup
TCP/IP IPv4
IPv6
NetWare NetWare
Frame Type
Print Service
AppleTalk
Select On to have any GL2-related warnings
displayed.
Selecting On will start printing jobs sooner if you are
printing only HP RTL print jobs and printing would not
start until later. However, images may be incomplete
in some cases, so be sure to check the printing
results.
Normally, the area available for printing excludes
a margin required by the printer, and images are
positioned accordingly. Selecting On in this setting
eliminates any misalignment of the printing position if
the image itself includes a border.
Selecting On will determine the paper size based on
the image rendering area.
Print GL2 settings information.
Specify the timeout period before cancellation of print
jobs that cannot be received by the printer.
IPv4 Mode Choose whether the printer IP address is congured
automatically or a static IP address is entered
manually.
Protocol DHCP Specify the protocol used to congure the IP address
automatically.
BOOTP
RARP
IPv4 IP Specify the printer network information when using
Settings Address a static IP address.
Enter the IP address assigned to the printer, as well
Subnet
as the network subnet mask and default gateway.
Mask
Default
G/W
IPv6 Support Specify whether to connect via IPv6.
IPv6 StlessAddrs Specify whether a IPv6 stateless address is used.
DHCPv6 Specify whether DHCPv6 settings are used.
Specify the NetWare protocol. To apply your changes,
choose Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To
apply your changes, choose Register Setting.
Description, Instructions
Control Panel
Printer Parts 57