Handling sheets
Using the Same Type of Paper Regularly
Congure this setting so that current media type settings will be automatically selected when you load the
same type of paper later.
1.
On the Tab Selection screen of the Control Panel, press ◄ or ► to select the Paper tab (
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2.
Press the OK button.
The Paper Menu is displayed.
3.
Press ▲ or ▼ to select Keep Paper Type, and then press the OK button.
4.
Press ▲ or ▼ to select On, and then press the OK button.
Note
•
The specied media type setting is updated in the following situations.
•
When using sheets, if you send a print job before loading a sheet, the media type setting is
updated to match the type of paper specied by the print job.
•
When you have selected ManageRemainRoll > On on the Control Panel and a barcode is printed
on the roll, the media type setting is updated to match the type of paper specied by the barcode.
•
To change the media type setting, see "Changing the Type of Paper". (→P.141)
142 Handling Paper
).
Need help?
Do you have a question about the iPF655 - imagePROGRAF Color Inkjet Printer and is the answer not in the manual?
Questions and answers