PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/
M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA
Release Notes
Added Functionality in this Release
This section contains a list of features added in this release that are new for at least one switch listed in the Hardware Supported
section above.
Release 5.1.0.1
IGMP Snooping Improvements
IP Multicast Enhancements
Support for B1 CPU – only on PC8100 series
New Browser Support
•
Mozilla Firefox 14
•
Internet Explorer 9
•
Google Chrome 21
Static Route Maximum Increased to 512 (for all switches except for M6220 series)
USB Auto-configuration expanded for multiple MAC Address support
Ability to reset stack port counters
Increased Maximum number of dot1x clients per port to 24
Commands to remove signed certificates/Keys
Support for Additional transceivers/optics
Release 5.0.1.3
Added PoE DC Disconnect HW support – on PC7000 series
Release 5.0.0.4
Added Native EEE Support for the PC8100 10GBaseT Ports
802.1Qaz (ETS) – on 8100 series
Support for 40 Gig (QSFP+) interfaces
Support for Bootcode upgrade from pre-4.x image to 5.x image without manual system reset.
Local Preference for LAG
Private VLAN
CLI output filtering
Routing Improvements for OSPF
UDLD
Administrative Profiles
AAA Authorization
TACACS+ Accounting
Stacking over QSFP+ ports
QSFP+ diagnostics
sFlow Support on Port Channels
Release 4.2.2.3
No Added Functionality in this Release
System Firmware Version 5.1.0.1
Page 7