Management – 4.2.1.3 - Dell Networking 7048 Release Note

5.1.0.1 firmware release notes
Hide thumbs Also See for Networking 7048:
Table of Contents

Advertisement

Release 5.0.0.4
System – 5.0.0.4
System
Description
8100 switches increment "Internal MAC
Rx Errors" counter, when packets are
received with (size > 1518) and (size <=
MTU size), and the packet contains an
invalid FCS or code error detected or an
IEEE length check error
Web
Description
The device manager GUI does not
support IE9 at this time.
iSCSI
Description
"show iscsi sessions" command does not
display established sessions on
M8024/M8024-k/PC8024/PC8024F
platforms.
Release 4.2.1.3
Management – 4.2.1.3
CLI
Description
CLI command 'show dot1x users' is
missing in CLI
Show policy-map interface command
does not take a port-channel parameter
Show dot1x statistics command is
missing in the CLI
Show crypto key pubkey-chain ssh -
"username" option does not work
68
User Impact
Low
For typical IP networks this problem won't be seen because the length
field/Ethertype will contain a valid value.
User Impact
Moderate – Multiple errors are displayed when trying to bring up the device GUI
with IE9.
Workaround: The User must use an Internet Explorer version prior to IE9 with the
GUI.
Note: This is not a limitation if running Release 5.1.0.1 or later versions of
firmware.
User Impact
Moderate –
Workaround: Configure partner devices to send tagged, not priority tagged
traffic.
User Impact
Low – Use the show dot1x clients command to show the authenticated clients.
Low – the administrator can show the counters on the individual members of the
port-channel and sum them manually.
Low – the administrator can show the statistics on the individual interfaces
None – the administrator must configure and associate a key to a user in order for
the user to be associated with an SSH key. The following example creates and
associates an SSH user with a key:
console(config)#username asd password XXXXXXXX privilege 15
console(config)#crypto key pubkey-chain ssh
console(config-pubkey-chain)#user-key asd dsa
console(config-pubkey-key)#key-string "ssh-dss
AAAAB3NzaC1kc3MAAACBAJRwUAD3AuRACp1MObBeh1AgyZb18wf9Bt
dip+t+1CbAqiqNEh4lBiew184DSKk0T6SnSSXuCN+bJnQPxJeiQt+OFnmjiYhn
HcvI04Q5KnQhloZcEFgSsmQ7zJnReWtLvUQI0QvBIStanzedmQVGHvDrQ5X
2R729ToSH0ibBrnYtAAAAFQDNord7S9EJvUkKKxVBpWE6/skCmQAAAIB
System Firmware Version 5.1.0.1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents