Dell Networking 7048 Release Note page 36

show crypto key After generating DSA & RSA keys,
mypubkey executing the command "show crypto key
generates two mypubkey" generates the following error
error messages messages:
<187> APR 23 09:09:22 192.168.1.2-1
OSAPI[162603392]: osapi_file.c(657) 426
%% File close failed for descriptor 37
<187> APR 23 09:09:22 192.168.1.2-1
OSAPI[162603392]: osapi_file.c(657) 427
%% File close failed for descriptor 37
There is no impact on the keys themselves.
Web GUI ARP The Web GUI does not display the
table does not static/local ARP entries. However, once an
match the CLI external port is linked up some, but not all,
ARP table of the Static/local appear in the Web GUI.
The copper auto The copper ports 1-24 fail on 8024 to
negotiation negotiate at 100Mb FD.
process fails at
100mb FD and
fails to link up
PCM6220 - The current stacking port status does not
Wrong display "stacking link up"
information for
current link
status in port
configuration
page on the GUI
PC8024 - If user changes VLAN membership
VLAN configuration on trunk port via the WEB he
membership loses ports configuration on access ports
change on and access ports are put into default VLAN.
interface affects
unrelated
interface
Implement The dot1qVlanStaticTable is not available
dot1qVlanStatic on M8024-k.
Table in
M8024-K
Trunk mode
native vlan Native vlan implementation is incompatible
implementation with Cisco. Switch will egress native vlan
not compatible traffic as tagged and Cisco will drop ingress
with Cisco tagged native vlan traffic.
PCM6220 - Switch hangs and needs a hard reboot.
Switch hangs
when user tries
to transfer a file
from the flash to
the server using
sftp
34
Resolved
All ARP entries are now
shown.
8024 copper ports negotiate to
100M FD.
The web stack display has
been updated to accurately
reflect the correct information
as well as address some style
issues.
Issue is resolved.
the dot1qStaticVlanTable is
implemented for the M8024-k
Implementation of native vlan
changed to be compatible with
Cisco.
None – issue is resolved.
System Firmware Version 5.1.0.1
All 4.2 supported
platforms
All 4.2 supported
platforms
PC8024
All 4.2 supported
platforms
All 4.2 supported
platforms
All 4.2 supported
platforms
All 4.2 supported
platforms
All 4.2 supported
platforms