Dell Networking 7048 Release Note page 39

5.1.0.1 firmware release notes
Hide thumbs Also See for Networking 7048:
Table of Contents

Advertisement

PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/
M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA
Release Notes
M8024 - 1GB
The M8024 is negotiating 1GB speed
link being
connection with the 10GB X520-KX4 Intel
negotiated on
card in the blade server. Issue is only
10GB Intel
present with new
X520-KX4
Feature request -
The "Client-DUID" is used to uniquely
Display "client-
identify an individual host receiving DHCP
DUID" in
address configuration.
DHCP binding
In the case of a multi-homed host, it is
table.
possible to determine that the host has
multiple bindings for different interfaces
and which interfaces belong to each host.
clock summer-
Time change offset is applied early.
time recurring
EU offset 60
zone "GMT" not
offsetting the
time by 60
minutes
M6220 - Simple
Modular switch in Simple mode. Interfaces
mode, VLAN
have VLAN settings different from default.
setting not
If you move port from one aggregation
active when
group to another, VLAN settings are
move port to
retained and are listed in running config but
another group
it is not active until system is rebooted or
VLAN information removed and reentered
again.
SSH
SSH config is not restored after reboot.
configuration
not restored
after reboot
PC8024 -
On 4.1.0.6 if VLANS are assigned to a
VLAN trunk
trunk, the switch CLI will display the
assignment CLI
VLANS not assigned instead of the VLANS
change
that are assigned
Web UI displays
After the browser session timeout (default
incorrect session
10 minutes), Web UI displays incorrect
timeout duration
session timeout duration in the message
"Your session had been inactive for more
than 240 minutes
PC8024 - Secure
If you go to system management, Secure
HTTP Random
HTTP, you will see random characters
Characters -
populating the fields. Even if you delete
4.1.0.6
these entries and re-populate with valid
chars, it will repopulate with invalid
characters making it impossible to generate
a cert using the web interface.
Upgrades to
The wizard in 4.1.0.9 fails to create any or
4.1.0.9 are
very few interfaces and there was no config
causing network
for any or very few of the ports, thus, the ip,
outages. The
icmp traffic was not working between ports
wizard from
as well.
4.1.0.9 fails to
setup interfaces
System Firmware Version 5.1.0.1
Incorrect pre-emphasis values
have been corrected.
Client-DUID parameter has
been added to show "ip dhcp
binding" command output.
Day of month calculation has
been corrected.
None – issue corrected
ssh configuration saved
VLANs are displayed in
positive format, i.e. assigned
VLANs are displayed.
The displayed message was
corrected.
The random character
rendering has been corrected.
Issue with switch upgrade has
been resolved.
PCM8024
All 4.2 supported
platforms
All 4.2 supported
platforms
All 4.2 supported
platforms
All 4.2 supported
platforms
All 4.2 supported
platforms
All 4.2 supported
platforms
All 4.2 supported
platforms
All 4.2 supported
platforms
Page 37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents