Dell Networking 7048 Release Note page 59

PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/
M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA
Release Notes
Release 4.2.2.3
 No Updates
Release 4.2.1.3

Please refer Dell PowerConnect Users Guide for more details
Release 4.2.0.4

Please refer Dell PowerConnect Users Guide for more details
Release 4.1.1.9
 No Updates
Release 4.1.0.19
The default authentication profile has changed from "enableList" to "enableNetList:
Telnet and SSH default to using the enableNetList authentication profile which requires an enable or line
password. The serial console defaults to using the enableList authentication profile which does not require the
use of a password. This change increases compatibility with industry standard behaviors. In previous releases,
telnet, SSH and the serial console defaulted to using the enableList profile which does not require a password.
The following table lists changes to the User's Configuration Guides after publication:
Change
Added examples of how a user would implement VLAN or QoS policy assignment in the Port
Based Security section.
Added a table of the RADIUS attributes supported by the PowerConnect switches in the
Controlling Management Access section.
The valid VLAN range is described as 1 to 4093 (multiple sections)
A better description of the RADIUS 'deadtime' parameter is added to the Controlling
Management Access section
The CLI command "monitor session 1 mode" is described in the Configuring Port Mirroring
section
System Firmware Version 5.1.0.1
Affected Platform
All Platforms
All Platforms
PC70xx
All Platforms
All Platforms
Page 57