Elo TouchSystems C-Series User Manual page 5

Caution

Power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord.

This unit must follow the national requirement and local state laws to
dispose unit.

Before connecting the cables to your Elo touchcomputer, make
sure all components are powered OFF.

Only approved components complying with IEC60601-1 series can be
connected to 19CX/22CX Touchcomputer for Healthcare Applications in
Patient Environment. The use of ACCESSORY equipment not complying
with the equivalent safety requirements of this equipment may lead to a
reduced safety of the resulting system. Consideration relating to the
choices of accessory equipment should include: Use of accessory in the
patient environment.· Evidence that the safety certification of the
accessory has been performed in accordance to the appropriate IEC
60601-1 and/or IEC 60601-1-1 har monized national standard.

For continued safety

This unit only complies to the above standards if used with a
medical grade power cord.

A medical grade power supply, such as the one specified, is
required for use in a medical application.

Please do not touch the patient and the touchcomputer output
connecter at the same time.
Note:
• This symbol alerts the user to important information concerning the
operation and maintenance of this unit, which should be read
carefully to avoid problems.
• This symbol means DC Current.
• This symbol means ON/OFF stand-by switch.
C-Series Touchcomputer for Healthcare Applications v