Controlling A Vcr - ProScan PS8600P User Manual

CONTROLLING A
VCR
The DVD's remote is programmed to control the basic functions of a
compatible ProScan, RCA, or GE VCR. The remote can also be set up
to control other brands. To program the remote, use the code that
correspond to your brand.
PROGRAM THE REMOTE FOR A
VCR
1. Turn on the VCR.
2. Point the DVD's remote at the VCR.
3. Hold the VCR button and press three digits for your brand.
4. Release the buttons.
5. Press PWR on the remote. If the VCR turns off, setup is complete.
6. Repeat steps 2 - 4 with three other buttons if the first ones do
not work.
OPERATE THE
VCR
After you have set up your remote to control your VCR, test the VCR
buttons to see which ones operate your VCR.
1. Point the remote at the VCR and press VCR.
2. If VCR does not turn on in step 1, press VCR and then PWR.
3. Use the "VCR Function Buttons" described on the previous page.
Power
button
VCR
button --
Digit
buttons --
DVD
REVERSE PLAY FORWARD
<21 C>
RECORD STOP PAUSE
r-_-i r-_-I r-_
INFO PLA¥ MODE
® Q
MUTE REPEAT
_T MEL_Nu MA'_I;_T
CLEAR AN(;I_
MOVE
SUBTITLE SUBTITLE
ON/OFF
The remote may not be able to control /
every TV model of the brands listed.
J
56 Reference