Controlling A Satellite Receiver - ProScan PS8600P User Manual

CONTROLLING A SATELLITE RECEIVER
The SAT button on the remote is programmed to control the primary
functions of a ProScan, RCA, or GE satellite receiver.
REPROGRAM THE REMOTE TO OPERATE YOUR
SATELLITE RECEIVER
If the SAT button accidentally gets its programming changed, use the
codes below to reprogram it to operate a ProScan, RCA, or GE
satellite receiver.
1. Turn on the satellite receiver.
2. Point the DVD's remote at the component.
3. Hold the SAT button and use the digit button to enter the correct code.
4. Release the buttons.
5. Press PWR on the remote. If the satellite receiver turns off,
reprogramming is complete.
OPERATE THE SATELLITE RECEIVER
1. Point the remote at the satellite receiver and press SAT.
2. Try the buttons to see which ones operate the satellite receiver.
Powe r
button
Digit
buttons
DVD
REVERSE pLAY FORWARD
<;1 C>
RSCORO STOP PAUSE
r-w-! r-w1 r-_--i
[N_ PLAYMOOE
® _
MUTE REPEAT
/o o Ol
Q ,
CL_R ANGLE
q ....
SUBTITLE SUBTITLE
ON/OFF
I SAT
button
SATELLITE RECEIVER FUNCTION BUTTONS
(Buttons Listed in Alphabetical Order)
Press the SAT button to set the remote to control a compatible receiver.
If you have a compatible receiver, test the buttons to see which buttons
operate the receiver. Some buttons may not work with every receiver.
CH+ and - Use to select next higher or lower channel.
CLEAR Use to remove menus from the TV screen.
Digits (0 through 9) Use to select a channel and menu items.
INFO Use to select menu items and display information.
MENU Use to display menus and select menu items.
MOVE Arrows Use to scroll through the menus and select menu items.
PWR Turns off a compatible satellite receiver when remote is set to
control it. Press twice to turn off all compatible components.
RETURN Use to return to the last channel selected.
Satellite Receiver Codes
RCA ................................... 000
ProScan .............................. 000
GE ...................................... 000
Reference 55