ProScan PS8600P User Manual page 11

A
FEW THINGS
YOU
SHOULD KNOW
Before you connect your
DVD player,
there are a
few things that you need to know.
Protect Your Components from Power Surges
• Connect all components before plugging any
power cords into the wall outlet.
Always turn off the DVD player, TV, and other
components before you connect or disconnect
any cables.
Position Cables Correctly to Avoid Audio Hum or
Interference
• Insert all cable plugs firmly into their jacks.
Place the audio/video cables to the sides of the
TV's back panel instead of straight down the
middle after you connect your components.
Try not to coil any twin-lead cables and keep
them away from the audio/video cables as
much as possible.
• Make sure all antennas and cables are properly
grounded.
Protect Your Components from Overheating
• Do not block ventilation holes in any of the
components.Arrange the components so that
air can circulate freely.
• Do not stack components.
• Allow adequate ventilation when placing your
components in a stand.