Playing Audio Cds; Audio Cd Playback Features; Skipping Tracks - ProScan PS8600P User Manual

LOADING AND PLAYING AN AUDIO
CD
Before you load a disc, make sure that it is compatible with the
player. Note that the following discs CANNOT be used with
this player:
• Laserdisc
• CD-I, CD-ROM, CD-R, DVD-ROM
• Mini Disc
• Discs recorded using other broadcast standards (i.e. PAL
or SECAM)
TO
LOAD AND PLAY AN AUDIO
CD
Make sure that you have properly connected the DVD player (see
"Connections") before you begin.
1. Press the OPEN/CLOSE button on the front of the DVD player.
2. Place a disc gently into the tray with the disc's label facing up.
3. Press the PLAY button to close the disc tray.
The DVD player reads the disc's table of contents, and then begins
disc playback.
4. Press STOP to stop playback.
Insert with the label facing up.
AUDIO CD PLAYBACK FEATURES
When playing audio CDs, your DVD player has many of the same
features that your CD player has, including track skip, repeat play, and
programmed playback.
SKIPPING TRACKS
To skip forward to the beginning of the next track on a CD, press
CH+ on the remote (SKIP FWD on the player).
To skip backward to the beginning of the track that is playing on a
CD, press CH- on the remote (SKIP REV on the player). Press the
button again to go to the beginning of the preceding track.
:32 Playing Audio CDs