ProScan PS8600P User Manual page 14

DVD
PLAYER +
TV
WITHOUT
AN
INPUT JACKS
(Good Picture and Mono Sound Quality)
DVD
PLAYER
TV
ANT IN
CABLE
__ RF
OUTPUT
ADAPTOR
P I
To
CONNECT THE
DVD
PLAYER
If you do not have audio!video input jacks on your television, you
need to use an RF output adaptor.
1. Connect the RF output adaptor into the back of the player as
shown above.
2. Connect the off-air antenna or your cable signal to the antenna
input on the RF output adaptor.
3. Cornect the output from the RF output adaptor to the antenna
input on your television.
CAUTION
Do not stack electronic components
or other objects on top of the DVD
player. See Safety Information, inside
front cover'.
To WATCH DVD
Tune your television to the EF output adaptor's output channel (the
output adaptor should have a CH 3/4 switch to indicate the output
channel).
Consult the owner's manuals of the
additional components you are
connecting for more detailed
connection information for those
particular ,components.
12 Connections