€ Usingthe Menusto Set Upyourvcr; Using The Allset Feature To Set Up Your; Using Video Mute; Adding And Deleting Channels - Mitsubishi HS-U780 Owner's Manual

Chapter3: OperatingYourVCR Playinga Tape (cont.)
_Important:
Jog dial
If the tape is stopped, you will begin fast forwarding. If the tape is
playing, you will begin "forward speed search", with picture.
pausing a tape
Press the PAUSE button either' on the remote control or on the
front panel to freeze the picture on the screen.
If you leave the VCR in pause fbr more tharL 5 minutes, the VCR
will automatically stop to prevent damage to the tape.
controlling vibration duringstillframe
If the picture vibrates during still frame, turn the jog dial while
holding down the ONE KEY PROGRAM button on the front panel
until the picture is steady.
€ Usingthe Menusto Set UpYourVCR
Before your VCR can :receive television channels or you can
program your VCR to record, you need to program all of the
channels you can receive into your VCR and set the clock. Addi-
tionally, if you want to program with the VCI_: Plus+ ® system, you
must do a one-time setup to record using the PlusCode numbers.
Fortunately, your VCR makes this an easy process with our menu
system. This section explains:
• Using the AllSet'" feature to set up your VCR automati-
cally,
• Using video mute,
• Adding and deleting channels, and
• Selecting a channel.
This section will also show you how to use the on-screen menus.
You will use the menus to operate many features. You will learn
how to use the menus by actually performing "Using the AllSet
feature to set up your VCR automatically."
On the on-screen merms, the selected item :is highlighted in white.
You will use the ADJUST dial and the shuttle ring on the remote
control to select and adjust menu functions, not the front panel.
Using the AIISet
TM
feature to set upyour VCR automatically
Using this feature, your VCR will automatically set the clock,
memorize all of the television stations avai:Lable to you and also
set the VCR Plus+ guide channel numbers. (You need to manually
set the guide channel numbers, for the channels from a satellite
receiver.)
For information about the VCR Plus+ guide channel numbers,
please see page 39.
28