Extron electronics CrossPoint 450 Plus Series User Manual page 147

Matrix Software, cont'd
Hardware status — Provides an overall view of the status of the matrix switcher,
Figure 5-14 — Status window
Name presets — Allows you to assign a name to each of the 32 memory presets.
Show RS-232 strings — Displays the ASCII commands that are used by the current
I/O group settings — Allows you to establish I/O groups.
Room configuration — Allows you to assign outputs to rooms or delete outputs
Initialize — Initializes and clears any or all of the following: ties, presets, audio
5-20 CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software
including the primary and secondary power supply status and the individual
voltages, the fan and temperature status, the Remote RS-232/RS-422 port
configuration, and the installed and updated firmware status (figure 5-14).
The CrossPoint 450 Plus and MAV Plus switchers are not available in custom
configurations. Each model has all available monitored components, such as
power supplies and fans, installed. If you see the white "not installed"
indication, the "not installed" component probably became disconnected
during shipment or rough handling.
Smaller switchers (16 x 16 matrix sizes and smaller) do not show the power
supply and fan status blocks.
Preset names are limited to 12 uppercase and lowercase alphanumeric
characters, space, and the _ and / characters.
The following characters are invalid in preset names:
+ ~ , @ = ' [ ] { } < > ' " ; : | \ and ?.
configuration. You can refer to these for SIS command programming.
from rooms.
A Room is a subset of outputs that are logically related to each other, as
determined by the operator. The CrossPoint 450 Plus or MAV Plus switcher
supports up to 10 rooms, each of which can consist of from 1 to 16 outputs.
configuration, preset names, icon names, and icons.
Green — Proper operation.
Red — Component has failed.
White — Components are not installed.