Global Presets Page; Save A Preset; Recall A Preset - Extron electronics CrossPoint 450 Plus Series User Manual

Global Presets page

You can save and recall global presets from the Global presets page (figure 6-20).
Access the Global presets page by clicking the Global Presets link on the left of the
Control page.
Select Set & View Ties.
Select RGB & Audio Settings.
Refresh.
Figure 6-20 — Global Presets page

Save a preset

Save the current configuration (configuration 0) as a preset as follows:
Click the Save Preset button.
1.
2. Select the desired preset by clicking on one of the presets listed. To create a
new preset, click one of the [unassigned] buttons. Overwrite an existing preset
by clicking an already existing preset.
If desired, type over the current name in the box adjacent to the Save Preset
3.
button.
If you do not rename an unassigned button, the CrossPoint 450 Plus or
MAV Plus switcher automatically names the preset as Preset {next available
number}.
If you do not rename an existing preset when it is overwritten, the
CrossPoint 450 Plus or MAV Plus switcher retains the same name.
Click the Accept button.
4.

Recall a preset

To recall a global preset to be the current configuration, click the button associated
with the desired preset.
CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
Preset names are limited to 12 uppercase and lowercase alphanumeric
characters and the {space} _ and / characters.
The following characters are invalid in preset names:
+ ~ , @ = ' [ ] { } < > ' " ; : | \ and ?.
6-19