Sleep Timer - Mitsubishi WD-57833 Owner's Manual

TV
Input Selection menu
andFeatures
Choose a viewing source from the Input Selection
menu. The current TV input appears as a full-color
icon in this menu.
1. Press INPUT t o display the Input Selection menu. If
there are only two inputs to the TV, INPUT s witches
between them without displaying the menu.
2. Highlight an input icon using A V 4 _.
3. Press ENTER to switch to the input and close the
menu.
More About the input Selection Menu
• To assign meaningful names to the icons, see the
inputs > Name menu in chapter 5, "TV Menu Set-
tings."
To rearrange the icons, see the inputs > Order
menu in chapter 5, "TV Menu Settings."
Sleep Timer
The Sleep Timer turns the TV off after the length of time
you set.
Setting the Sleep Timer
1. Press SLEEP on the remote control.
2. Press SLEEP additional times to increase the time in
30-minute increments up to the maximum of 120
minutes.
3. Press EXiT or wait five seconds without pressing any
buttons for the message to disappear.
4. Press SLEEP to view the time remaining before the
sleep timer turns off the TV.
Cancelling the Sleep Timer
1. Press SLEEP to display the on-screen message.
2. Press SLEEP r epeatedly until OFF is displayed.
Note: After five seconds of inactivity, the message box
will disappear.