Mitsubishi WD-57833 Owner's Manual page 54

etCommand
• NetCommand setup is optional.
You can perform NetCommand setup when the TV
first recognizes a device during Auto Input Sensing
or at any convenient time afterward.
NetCommand operates by sending remote control
signals from the TV to your other devices via the IR
emitters, telling the devices to play, record, change
inputs, adjust volume, change channels, or perform
other functions. All this is accomplished with the
TV's remote control and the slide switch left in the
TVposition.
The IR "Learning" feature of NetCommand allows
the TV to determine the IR control signals for your
A!V devices.
NetCommand e) can control IEEE 1394 devices by
sending control signals over a FireWiree) cable.
You can choose the level of NetCommand control
for your home theater.
Standard Setup. Perform a standard setup if
you:
,, Want NetCommand to control only a few
devices, such as the TV, a playback device
(like a DVD player), and a cable box. With
this setup, you can use the TV's remote
control to operate these devices.
• Want the ease and flexibility of
NetCommand-controlled recording, with
seamless setup of time-delayed or immedi-
ate recordings among networked devices.
• Want to use TV Guide On Screen to control
your VCR or A/V disc. After performing this
setup, you can use the TV's remote control
to operate these devices.
A/V Receiver
Setup.
Perform A/V receiver
setup if you want NetCommand to:
* Control a surround sound A/V receiver.
* Automatically change audio input selections
on an A!V receiver when you change inputs
on the TV.