Mitsubishi WD-57833 Owner's Manual page 19

3. TV Connections 19
Wa, 0 .t,etCab,e
It is very important to connect the incoming cable for
your primary viewing source to ANT l/MAIN.
1. Connect the primary incoming coaxial lead cable to
ANT l/MAIN on the TV back panel.
2. For an optional secondary antenna source, connect
an antenna (or cable) to ANT 2/AUX.
VHF Leads
Required: UHF/VHF combiner
1. Connect the UHF and VHF antenna leads to the
UHF/VHF combiner.
2. Push the combiner onto ANT l/MAIN on the TV
back panel.
To ANT 2/AUX
@
To ANT t/MAIN
rv back panel detail
Figure 4. Wall Outlet Cable
m
m
Fiat Twin Lead
VHF Antenna
(Channels 2-13)
UHF Antenna
(Channels 14-69)
r
External
Antenna 300-Ohm-to-
or Cable 75-Ohm
I L_ cembiner
1. _aek Side
" View View
TV back panel O O
To ANT l/MAIN
Figure 5. Connecting separate UHF and VHF Antennas
A. For an antenna with flat twin leads
Required: 300-ohm-to-75-ohm transformer.
A1. For an antenna with flat twin leads, connect the
300-ohm twin leads to the 300-ohm-to-75-ohm
transformer.
A2. Push the 75-ohm side of the transformer onto ANT
1 on the TV back panel.
B. For cable or antenna with coaxial lead
Connect the coaxial lead directly to ANT 1 on the
TV back panel.
300-Ohm
FlatTwin
Lead
TV Back Panel
........ Q , @
CD ) t'/j =
At. Optional 300-Ohm=
to-75-Ohm
Matching Transformer
Figure 6. Connecting a Single Antenna Lead