Mitsubishi WD-57833 Owner's Manual page 46

46 5. TV Menu SettMgs
Clock
Use either the manual or auto method to set the clock.
Set the clock if you wish to:
• Use the TV's Timer function.
Maintain accurate ChannelView listings.
Schedule NetCommand- and TV Guide On Screen-
controlled recordings.
Clock
Settings
Time
(Manual
option only)
Date
(Manual
option only)
Time Zone
Daylight
Savings
Time
Setup menu, Clock options
Manual. To set the clock manually:
1. Select Manual.
2 Set the time of day.
3. Set the date.
4. Select your time zone.
5. Select either Applies or ignore for Daylight Savings Time.
Note: If using Manual, each time the time change occurs, you must open this
menu and set the TV's clock ahead or back.
Auto. To set the clock automatically:
1. Select Auto.
2. Select your time zone.
3. Select either Applies or ignore for Daylight Savings Time.
4. After exiting the menus, tune the TV to a station carrying XDS data, typically
a PBS station.
Note:
• With the Auto setting, the TV's clock adjusts automatically to daylight savings time.
The TV's clock will be reset if you tune to a channel sending incorrect time
data. To prevent unwanted clock resets, first use the Auto method to set
the clock from a channel sending the correct time, then change the method
to Manual.
1. With the hour highlighted, press A Y repeatedly to change the hour and the
AM/PM indicator. Press and hold to change the hour display quickly.
2. Press ENTER to set the hour.
3. With the minutes highlighted, press A V to change the minutes. Press and
hold to change the minutes display quickly.
1 With the month highlighted, press A Y to select. Press ENTER to set.
2. With the day highlighted, press A Y to select. Press ENTER to set.
3. With the year highlighted, press A _' to select the current year.
Required for both the Manual and Auto methods. Eastern, Central,
Mountain,
Pacific, etc.
Applies
ignore
Required for both the Manual and Auto methods. Select
the option for your area.