Tv Back Panel - Mitsubishi WD-57833 Owner's Manual

1 8 3. 71/Connections
HDM! Device
ReViver,
Required: HDMI-to-HDMI cable.
Connect an HDMI cable from the TV back panel to the
HDMI device output. HDMI devices provide video and
audio through the single cable.
Mitsubishi recommends you use category 2 HDMI
cables to connect HDMI 1.3 source devices. High-
speed category 2 cables bring you the full benefits of
Deep Color and x.v.Color. See chapter 1, "TV Overview,"
for more on HDMI cable types.
or Other Device
Required: S-Video cable and left/right analog stereo
audio cables.
1. Connect the cable from the outside cable or satel-
lite service to CABLE iN or SATELLITE iN on the
cable box or satellite receiver.
2. Connect an S-Video cable from S-VIDEO OUT on
the cable box or satellite receiver back panel to
iNPUT S-VIDEO on the TV back panel.
3, Connect left (white) and right (red) audio cables
from AUDIO OUT on the cable box or satellite
receiver to iNPUT AUDIO L (MONO) and R on the TV
back panel.
Note: Refer to the cable box or satellite receiver
Owner's Guide for cable or dish antenna con-
nections to the receiver.
Figure 2. Connecting an HDMI device.
Note: HDMI inputs are Simplay/-/D_ certified for proper
interoperability with other products certified by
Simplay
TM.
TV Back Panel
-. @:-®®
3,
i i i' :i!i
TM
:ii i Y !I II
c'tt,;T,'t
Wall
Any S-Video Device
Figure 3. Connecting a device with S-Video