Mitsubishi WD-57833 Owner's Manual page 30

30 4. TV Operation and Features
ChannelView screen
ChannelView
TM
shows memorized channels on ANT
1 or ANT 2. It displays channel names and program
information as sent by broadcasters or your local cable
service provider and may be incomplete. No program
information is displayed for analog channels. An analog
channel name is displayed only if you assigned a name
in the Setup > Edit menu.
• You can use either ChannelView or the TV
Guide On Screen system to see channel listings.
ChannelView is accessible via the GUIDE k ey unless
you activate the TV Guide On Screen system. For
details, see the separate TV Guide On Screen Inter-
active Program Guide User's Manual.
To receive ChannelView updates:
Keep the Energy Mode set to Fast Power On
Set the TV clock
Leave the TV powered off for a while each day
to receive updates.
Note: Whenever you watch a digital channel, listings
are updated for the channel you are watching.
Using ChannelView
See ChannelView listings Press GUIDE.
from ANT 1 or ANT 2.
Close ChannelView Press GUIDE o r EXIT.
Scan channels one by one. Press and hold A or V.
Scan channels quickly. Press and hold PAGE/_/V.
Jump to listings for a spe- 1. Enter the channel
cific channel, number (see numbers
in upper left of screen).
2. Press ENTER.
See more of the program Press INFO.
description (if available).
Move navigation to the Press _.
program guide.
Move navigation to the Press 4.
channel guide.
Tune to the highlighted Press ENTER.
channel.