Component Video - Mitsubishi WD-57833 Owner's Manual

20 3. 71/Connections
Component video cables and analog audio cables are
required.
1. Connect the component video cables from Y Pb Pr
VIDEO OUT on the back of the DVD player to the
COMPONENT jacks on the TV back panel, match-
ing the green, blue, and red colored connections.
2. Connect left (white) and right (red) stereo audio
cables from AUDIO OUT on the back of the DVD
player to COMPONENT AUDIO L (MONO) and
AUDIO R on the TV back panel.
Figure 7. Connecting a DVD player with component
video
Note: To hear digital surround sound from your DVD
player, connect the digital audio output from the
DVD player directly to your digital A/V receiver.
DVI Video
Receiver,
Connect DVl devices (digital only) to the TV's HDMI
input jacks.
Analog stereo audio cables and a DVI=to=HDMI cable or
DVl/HDMI adapter and HDMI cable are required.
1. Connect the DVI=to=HDMI cable (recommended) or
HDMI cable with DVl/HDMI adapter from the DVl
device's back panel to the TV's HDMI jack.
Note: if you are using a DVl/HDMI adapter, it is impor=
tant to connect the adapter to the DVl device for
best performance.
2. Connect a set of audio cables from AUDIO OUT
on the DVI device back panel to the DVI/PC AUDIO
INPUT on the TV back panel. Connect the red
cable to the R jack and the white cable to the L
(MONO} jack.
Note: The HDMI connection supports copy protection
(HDCP).
Some devices require connecting to an analog
input first, in order to view on=screen menus
and to select DVl as the ouput. Please review
your equipment instructions for DVl connectivity
and compatibility.
.) C' ;
TV Back Panel
=] :;22,
A
DVltotDMI _M 1'I t 2.
DVI OUT L R
AUDIO OUT
DVI Device
Figure 8. Connecting a digital DVI device