Mitsubishi WD-57833 Owner's Manual page 81

Appendices 81
TV Reset Comparison Guide
You can resolve many common TV problems using
the reset functions described in the following table.
See also the troubleshooting suggestions later in this
appendix.
IMPORTANT
Before you change sound or picture settings: If
picture or sound settings seem wrong for a broadcast
channel (a channel from ANT 1, ANT 2, a cable box, or
satellite receiver), first check other channels from the
same input before changing settings. If most other
channels from the same input seem correct, there is
likely a problem with the broadcast rather than with the
TV. Use care in this case, as changes you make to fix
problems on individual channels also affect all other
channels on the same input.
Format When the picture shape Press the FORMAT key to cycle through the The last-used format for a signal
seems incorrect, use available formats to find the best format type is memorized for each input.
FORMAT to change the for the current picture. The next time the same input and
shape of the picture, the same signal type is viewed, the
last-used format will be recalled.
i
PerfectColor
TM
When the color intensities 1. While viewing the input to be reset, All PerfectColor/PerfecTint sliders
and PerfecTint
TM
seem out of balance, press MENU to display the Main are reset to the original center
position. The PefectColor/PerfecTint Reset
(for the single
input currently
being watched)
use the PerfectColor/
PerfecTint reset to reset
the color balances to the 2.
original factory settings.
Both PerfectColor and
PerfecTint and are reset 3.
menu with the A/V icon highlighted.
Use 1_to highlight PerfectColor settings for other inputs remain
and press ENTER to display the unchanged.
PerfectColor adjustment screen.
Press CANCEL to reset the colors.
at the same time.
A/V Memory When audio and/or video 1. While viewing the input to be reset, All Audio and Video settings for the
Reset settings for a single input press MENU to display the Main individual input are reset except
for the Listen To, Language, audio
(fOrinputthecurrentlySingle seemMemoryinCorrect,Reset toUSereturnA/V menu with the A/V icon highlighted. Balance, and Closed Caption
being watched) the input to the original 2. Use I1_ to highlight the Reset icon settings.
factory settings, and press ENTER t o reset.
A/V Reset To reset audio and video While viewing the TV, press the front All Audio and Video settings are
(for all inputs) adjustments for all inputs panel buttons GUIDE a nd FORMAT at the returned to the original factory
to the original factory same time. settings, including Listen To and
settings. Language, plus Closed Captions
settings and Format settings.
Memorization memorize channels on display the Main menu.
ANT 1 or ANT 2. 2. Press Y to highlight the Setup icon.
3. Press _ to highlight the Scan icon.
4. Press Y to highlight the antenna
input and reception mode, e.g. Ant
t Air.
5. Press _ to highlight the Start
button icon and press ENTER to start Ed!t menu instructions in chapter
the memorization. 5, TV Menu Settings.
Lock Menu Pass To change your Lock See the cutout page in Appendix C. Allows a new code to be
Code menu pass code established.
nels for the selected antenna
input are erased and a new
set of memorized channels is
created. All custom settings for
Fav channel names and channel
locks are deleted. To add or
delete individual channels, see