Mitsubishi WD-57833 Owner's Manual page 65

6. NetCommand 65
Recording from ChanneIView"
ChannelView
TM
is available when TV Guide On Screen
is disabled. ChannelView provides program listings, as
sent by the broadcasters, for memorized channels on
ANT 1 and ANT 2. Press the GUIDE k ey while watching
ANT 1 or ANT 2 to see ChannelView listings and to set
up immediate or future recordings as described here.
1. Switch the TV to the program source by using the
input Selection menu.
a. Press INPUT to display the Input Selection
menu.
b. Highlight the icon for the antenna and press
ENTER to switch to the program source.
2. Press GUIDE t o view ChannelView listings for the
current input.
3. Use A Y to highlight the channel and program you
wish to record.
4. Press (_ {RECORD}. The TV will tune to the channel if
needed.
A red "R" briefly appears next to the program listing
to indicate the program will be recorded.
5. Press EXIT to return to TV viewing.
Time-Oelayed Recording from Channe!View
Set Up the Recording
1. Ensure that TV Energy Mode is set to Fast Power
On and the TV clock is set to the correct time and
day. See "Setup Menu" in chapter 5, "TV Menu
Settings."
2. Press GUIDE t o view ChannelView listings for the
current input.
3 Press A V to highlight the source channel from
which you wish to record.
4. Press I_ to view a list of future programs on that
channel.
5. Press A Y to highlight a future program.
6. Press (_ {RECORD}. A red "R" temporarily displays
next to the program listing to indicate the program
will be recorded.
8.
b. Highlight List to display the Record List.
Press MENU to return to the top row of icons or press
EXIT to return to TV viewing.
A red "R"
appears briefly
in ChannelView
to indicate
a scheduled
recording.
7. Review the Record List to confirm that the record-
ing is now in the schedule. To view the Record List:
a. Press MENU to display the Record menu.