Mitsubishi Mr.Slim WD-52627 Owner's Manual
  1. Manuals
  2. Brands
  3. Mitsubishi Manuals
  4. Projection TV
  5. Mr.Slim WD-52627
  6. Owner's manual

Mitsubishi Mr.Slim WD-52627 Owner's Manual

Projection television
Hide thumbs Also See for Mr.Slim WD-52627:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Training Manual
DIGITAL
TELEVISlrlNB"
HIGH DEFINITION MULTIMEDmA _NTER_ACE
_Lin(
°
TV Unformation:
Use this
space
to record
the
model
and serial
numbers
of
your
television.
This
information
is on the
back
of your
TV
Model
number
Serial
number
v_s_t our
bs_t÷

Advertisement

Table of Contents
loading

Related Manuals for Mitsubishi Mr.Slim WD-52627

Summary of Contents for Mitsubishi Mr.Slim WD-52627

  • Page 1 DIGITAL TELEVISlrlNB" HIGH DEFINITION MULTIMEDmA _NTER_ACE _Lin( ° TV Unformation: Use this space to record model and serial numbers your television. This information is on the back of your Model number Serial number v_s_t our bs_t÷...
  • Page 2 TV Guide On Screen® Access Requirements TV Guide On Screen listings are not provided by Mitsubishi Digital Electronics America, Inc. Operation of TV Guide On Screen requires over-the-air or cable access to stations carrying TV Guide On Screen program listings. If listings are not available in your area or become discontinued by the local provider, TV Guide On Screen will not operate.
  • Page 3 Product: Projection Television Receiver ModeUs: WD-52627, WD-62627 ResponsibUe Party: Mitsubishi DigitaU EUectronics America, Rnc. 9351 Jeronimo Road Rrvine, CA 92618-1904 949-465-6000 Telephone: This device compHies with Part 15 of the FCC RuHes. Operation is subject to the following two conditions:...
  • Page 4 IMPORTANT SAFEGUARDS PUease read the foHowJncj safeguards for your TV and retain for future reference. AUways follow aH wamJncjs and instructions marked on the teUevJsJon. Read, Retain and Follow All mnstructions Read aH safety and operating instructions before operating the TV. Retain the safety and operating instructions for future reference.
  • Page 5 IMPORTANT SAFEGUARDS, continued Power Lines An outside antenna system shouid not be ]ocated in the vicinity of overhead power Hines or other ebctrb Hight or power circuits, or where it can fall into such power Hines or circuits. When k_staHing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

  • Page 6: Table Of Contents

    Chapter 1: Television Overview TV Accessories ..............Special Features ..............Front Control Panel ..............Remote Control Overview ............... Battery Installation .............. Care ................Sleep Timer ..............TV Back Panel ..............Media Card Slots ..............Front-Panel Input 3 ..............Using the System Reset Button ............
  • Page 7 ........Appendix Appendix E: NetCommand@ Specialized Device Keys ......... Appendix F: On-Screen Information Displays ......... Appendix G: Cleaning and Service ..........Appendix H: Lamp Cartridge Replacement ........... Trademark and License Information ..........Index .................. Mitsubishi Projection Television Limited Warranty ....
  • Page 8 Mitsubishi has worked to provide you with a television that defines "state-of-the-art," with the capability to meet your needs now and in the future. Whether this is your first Mitsubishi electronic product, or an addition to your Mitsubishi...
  • Page 9 ,(eV(S(On uverv(ew TV Accessories ........SpeciaU Features ........Front Control Pane) ........Remote ControU Overview ........Battery Installation ........Care ........... S(eep Timer ........TV Back PaneU ........Media Card SUots ........Front-PaneU Input 3 ........Using the System Reset Button ......

  • Page 10: Chapter 1: Television Overview

    TV Accessories Phase take a moment to review the following Uistof items to ensure that you have received everything incUuding: One Doubb BREmitter Cabb (allows NetCommand to controi other devices) Product Registration Card (not pictured) Owner's Guide (not pictured) Quick Reference Card (not pictured) IIIIIIIII TV Guide On Screen@ Interactive Program Guide User's Manual (not pictured)

  • Page 11: Special Features

    Contact your local cable provider for availability information and service details. NetCommand ® Home Network ControJ System Your widescreen Mitsubishi HDTV offers a new level of networking to combine selected older products with new and future digital products. NetCommand supports IEEE 1394 connections,...

  • Page 12: Front Control Panel

    Front Control Panel The shaded buttons on the front control panel are duplicated on the remote control. The top row of labels shows the control functions when there are no TV menus displayed on the screen. The bottom row of labels shows the control functions when the TV menus are displayed on the screen or when a special function has been activated.
  • Page 13 Wait one minute and then plug the set back If the LED is still on, contact your dealer or a Mitsubishi Authorized Service Center. See www. mitsubishi-twcom or call 1-800-332-2119 to receive Authorized Service Center information. None (indicator Normal TV on or standby condition.

  • Page 14: Remote Control

    Remote ControJ Overview F/gure 1, following page ,ViewPoigl on-screen menu s ystem. Slide Switch: SeHects AiV product to be controlled 18. TV MENU: Displays by the remote control SeHect TV for NetCommand@ 19. DEVICE MENU: DispIays or removes the options menu device control for TV Guide On Screen.

  • Page 15: Battery Installation

    Remote Control, continued Care For Best Results from the Remote Control: Be within 20 feet of the equipment. Do not press two or more buttons at the same time unless instructed. Do not allow unit to get wet or become heated. DEVICE CHANNEL VOLUME...

  • Page 16: Tv Back Panel

    TV Back Panem 1. Antenna (ANTe1 MAIN, ANTe2 AUX) 4. COMPONENT 1, 2, and 3 inputs ANT-1 MAIN and ANT-2 AUX can each receive both digital YPbPr (480i/480p/720pi1080i} and analog over-the-air channels from a VHF/UHF antenna These inputs can be used for the connection of devices or non-scrambled digital/analog...
  • Page 17 TV Back Pane[, continued are in effect. Audio alone is output when Component 1, 2, access card customized to your account. This card allows the TV to receive, decode and unscramble or 3, or the HDMI input is selected for recording. premium digital channels included...

  • Page 18: Media Card Slots

    Media Card Slots and FrontoPanei Inputs Media Card Slots To access the media card slots, press on the center panel labelled PUSH. There are four card slots in the front of the TV that allow the display of JPEG pictures from many digital cameras, MP3 or WMA audio files recorded from computers or other digital recording...

  • Page 19: Using The System Reset Button

    Additional Information Using the Reset Menu to Reset the Using the System Reset Button If the TV doesn't respond to either the remote controH or the front paneHcontroHs or will not power off, press the SYSTEM RESET button on the front paneHwith a Read on-screen warnings before...
  • Page 21 Connecting E×temaU Devices and NetCommand® Setup ....CabieCARD TechnoUogy ......WaUt OutUet CabUe ........Standard Cable Box ......... Antenna with a Single Lead ......Antennas with Separate UHF and VHF Leads ....VCR to an Antenna or Wall OutUet Cable (Audio & Video} ..VCR to a CabUe Box (Audio &...

  • Page 22: Chapter 2: Connecting

    Connecting E×temai Devices and NetCommand® Setup NetCommand is able to control many current audio and video devices by sending remote control signals from the TV to each device through IR emitters. Additionally, it is also able to barn the remote control signals used by most audio video devices not already in the TV's memory.

  • Page 23: Tm Technology

    CabieCARE) Technology Using a CabJeCARD CabJeCARD TechnoJogy CableCARD is a nationwide system standard that After inserting a CableCARD into the TV back allows your local cable TV provider to supply you with panel CableCARD slot and powering On the TV, the an access card customized to your account.

  • Page 24: Wall Outlet Cable

    Connecting a Wail Outlet Cable or Cable Box Wall OutJet CabJe Standard Cable Box (can be used with a CabJeOARD (analog cable box, other than an HDTV cable box, Figure 1 compatiMe with PIP) It is very important to connect the incoming cabb Figure 3 coaxial cables and one two-way RF splitter are required, for your primary vbwing source to ANT-l, especially...

  • Page 25: Antenna With A Single Lead

    Connecting an Antenna with a Single Lead or Antennas with Separate UHF and VHF Leads Antenna with a Single Lead Antennas with Separate UHF and VHF (not for use with CabIeCARD Leads Figure Figure 4 For antennas with flat twin leads A UHF/VHF combiner is required, This is not included with the A 300-Ohm to 75-Ohm transformeris required.

  • Page 26: Vcr To An Antenna Or Wall Outlet Cable (Audio & Video)

    Connecting a VCR to an Antenna or Wail OutJet CabJe Connecting VCR Audio and Video to the TV VCR to an Antenna or Wall OutJet CabJe {Audio & Video) Figure 5 Connect either an S-Video or Video cable from A two-way RF spfitter, 3 coaxial cables, right and left audio cables and an S-Video or Video cable are required, These are VIDEO OUT on the VCR back panel to INPUT-1 not included with the T_:...

  • Page 27: Vcr To A Cable Box (Audio & Video)

    Connecting a VCR to a CabJe Box (Audio & Video) VCR to a Cable Box (Audio & Video) connects to the R (right) channel and the white Figure 6 cable connects to the L (left) channel. If your VCR A two-way RF splitter, 4 coaxial cables, n_Tht a nd left audio is mono (non-stereo), connect only the white ([eft) cables and an S-Video or Video cable are required, These are cable.

  • Page 28: A/V Receiver (Stereo System)

    Connecting an A/V Receiver (Stereo System} Connecting a Satellite Receiver or Other Device with S -Video A/V Receiver (Stereo System} Satellite Receiver or Other Device with Figure 7 S-Video A digital audio cable and stereo audio cables are required. Figure These cables are not included with the TV.

  • Page 29: Dvd Player With Component Video

    Connecting a DVD Pmayer with Component Video Connecting a DVl Device DVD PJayer with Component Video DVl Device Figure 9 Figure 10 Component video cables and audio cables are required, A DV/-to-HDMI cable or DVI/HDMI adaptor and HDM/cable These are not included with the TV, and audio cables are required, These are not included with the TV, They may be available at your local electronics retailer, 1_ Connect the Component...

  • Page 30: Hdtv Cable Box Or Satellite Receiver With Component Video

    Connecting an HDTV Cable Box or Satellite Receiver with Component Video Connecting an HDMI Device HDTV CabJe Box or Satellite Receiver HDTV Receiver to TV Back panel YtoY with Component Video Pr to Pr Figure 11 Pb to Pb A coaxial spfitter, RCA component video cables, and audio cables are required, These are not included with the T_/: Connect L (left) and R (right) audio cables from the DTV receiver to Component-1...

  • Page 31: Computer With An Hdmi Monitor Output

    Connecting a Computer with an HDMI or DVl Monitor Output Computer with a [:)Vi Monitor Output Computer with an HDMI Monitor Figure 14 A DVI-to-HDMI cable or DI/?/HDMI adaptor and HDM/cable and Figure 13 audio cables are required. These are not included with the TV. An HDMI-to-HDMI cable is required.

  • Page 32: Ir Emitter Netcommand

    Connecting Emitter NetCommand ® IR Emitter NetCommand® With some devices, the emitter works better facing Figure 15 downward from the top of the device. Some An IR emitter cable is included with the TV. experimentation may be needed. The emitters connected to these jacks are used by the The emitter end being used can be secured in place NetCommand...

  • Page 33: Compatible Ieee 1394 Devices

    Connecting Compatible IEEE 1394 Devices CompatibJe IEEE 1394 Devices When Connecting IEEE 1394 Devices It is possible to connect devices to the TV that have EEE Do not loop the last device in the chain back 1394 connectors but are not compatible with the TV or with to the TV.
  • Page 34 Connecting CompatibJe IEEE 1394 Devices, continued Connection StyJes 4oPin Styme vs. 6-Pin Style Connectors There are two different connection stybs that can be used when connecting IEEE 1394 devices. Use the There are two different types of connectors used for IEEE 1394 terminals and cables, a 4-pin and a 6-pin sue that fits your network of audio/video products.

  • Page 35: Helpful Hints

    If your AiV Receiver's remote control has an Analog/Digital Audio key, you can use the GUIDE key with the following models to control switching: Mitsubishi M-VR900 Integra DTR-9.1 Denon AVR-2700 Kenwood VR-2080 To make the switch, press the Device key on the TV's remote control, and from the Device Selection menu, press the Audio key.
  • Page 37 :up and Editing NetCommand@ introduction ......Using the Remote ControU with NetCommand@ ..... NetCommand@ Setup On-Screen Buttons ....3D GraphicaU _ Menu System ....... NetCommand@ lnitiaJ Setup ......Edit NetCommand@: Add an A/V Receiver ....Edit NetCommand@: Add Devices ....... Edit NetCommand@: Change or DeUete Devices...

  • Page 38: Chapter 3. Netcommand Setup And Editing

    NetCommand® introduction WeJcome To NetCommand NetCommand makes your TV the heart of your Home Theater NetCommand@ is an inteHHigentcontroH system that makes your MitsubisM TV the heart of your home theater, With NetCommand, the TV sends signaHs to the other devices in the system, teHHing them to pHay,record, change inputs, adjust voHume, change channeHs and many more functions.

  • Page 39: Using The Remote Control With Netcommand

    TV remote to operate these devices in the traditional manner. NetCommand PreoMemorized Devices DEVICE AiV receiver CabUe Box SATSatellite DVDPlayer Receiver Mitsubishi M_VR800, SR_HD5 DD-600O, D %8020 HS-U7g5,HS- M_VR90O U778 Hose Lifestyle®28 Lifestyle®28 Denon AVR-2700 Echostar...

  • Page 40: Netcommand® Setup On-Screen Buttons

    To use the TV's NetCommand feature, you need to provide some detailed information during the setup of your Mitsubishi TV. You must define the manufacturer of the devices that are connected to the television, or learn the IR code remote control...

  • Page 41: 3D Graphical

    3D Graphical VI+WP+IM Menu System Your TV aHso has Mitsubishi's excHusive 3D GraphicaH _1_l on-screen operating system, which provides on-screen information for menu choices and changes, using the TV's remote control Menu Screens Remote Control Buttons +VNBWP+in[ t Vi+WPO+n[ The following buttons on your remote control help you...

  • Page 42: Netcommand® Initial Setup

    NetCommand® Initial Setup The initiaH setup screens that appear when you first If the NetCommand Setup is cancelled before it's power on your new MitsubisM TV guide you through completed, you can restart the NetCommand setup setup of NetCommand and the TV Guide On Screen® from the Setup Reminder screen (see below) or by system.
  • Page 43 NetCommand ® Initial Setup, continued Device Setup Screen TV Guide On Screen® System Setup Figure 4 Figure 5 If the devices connected to the TV are akeady in The TV Guide On Screen option allows you to select NetCommand memory, you can quicHy sebct them whether you want to enable the TV Guide On Screen at this screen.
  • Page 44 NetCommand ® Initial Setup, continued Finish Screen Review Screen Figure 6 Figure 7 To compHete the NetCommand setup, seHect Finish After you have made your device choices, the Review from the Finish screen. Screen will dispHay. It is important to review the settings to ensure that they are correct.

  • Page 45: Edit Netcommand®: Add An A/V Receiver

    If a number follows the Depending on your A/V Receiver's capability, you may manufacturer's name, (example: Mitsubishi 1), this connect up to seven AiV inputs. Select the number of indicates additional models are optimized for that inputs by pressing ADJUST _k or V.
  • Page 46 Edit NetCommand®: Add an A!V Receiver, continued A/V Receiver (AVR) Input Learn Screen A/V Receiver (AVR) Learn Screen Figure 10 Figure I1 Press ADJUST A or _' on the TV remote to select the NetCommand can now Heamthe remote centroH signaHs check box for each function to be learned.
  • Page 47 Edit NetCommand®: Add an A!V Receiver, continued Name Screen Finish Screen Figure 12 Figure 14 The Name screen allows you to change the defauHt name To flnaHize your seHections and compHete the AiV for the A/V receiver to a custom name of up to eight receiver setup, seHect Finish from the Finish screen.

  • Page 48: Edit Netcommand®: Add Devices

    Edit NetCommand®: Add Devices Mitsubishi's NetCommand allows you to edit your home theater configuration. You can add new devices, change device settings and connections, debte devices and barn remote controi IR signais not aiready in NetCommand memory. Add Screen Edit NetCommand...
  • Page 49 The device should perform the selected function. The device needs to be turned on manufacturer's name, (example: Mitsubishi 1), this indicates additional models are optimized for that and the IR emitters properly placed for the test to be manufacturer.
  • Page 50 Edit NetCommand®: Add Devices, continued to deHete the current Hetter and move back one character position. When in the first position, the CANCEL button wifl return the name to the defauHt name. Figure 18. [Device] Learn screen Figure 20. Name screen [Device] Advanced Learn Screen...
  • Page 51 OUT on the TV, which outputs anaHog signaHs converted VCR you can specify the IR Code setting to VCR-B, if the from digital primary Mitsubishi VCR is using the VCR-A IR code. Figure 22. VCR for Recordings screen Figure 24. IR Code for [Device] screen...

  • Page 52: Edit Netcommand®: Change Or Delete Devices

    Edit NetCommand®: Change or Delete Devices Finish Screen Change Device Screen Figure 25 Figure 27 SeHecting Change from the Setup menu screen, dispHays To finaHize your seHections and complete the NetCommand the Change screen, To change a device, seHect the device setup, seHect Finish from the Finish screen, by name, not type, You can change the name or input...
  • Page 53 Control IEEE 1394 Devices and NetCommand® Control ....Adding IEEE 1394 Devices Automatically ....Device Selection Menu ....... Using the Device Menu Button to Display Menus ..... Using the GU|DE Button to Display ChannelView and Menus... NetCommand®-Controlled Recordings...
  • Page 54 [EEE 1394 Devices and NetCommand® Control See pages 30-31 for information regarding compatible IEEE 1394 devices and connection styles. The TV is not able to contro[ IEEE 1394 devices that use other types of control protocols. Incompatible digital audio, video and/or control information will still be able to pass from one device through the TV to another...

  • Page 55: Automatically

    Adding IEEE 1394 Devices Automatically Name for 1394 Device Screen Adding IEEE 1394 Devices Figure 2 If you choose to add the discovered IEEE 1394 device, When an IEEE 1394 device is connected into the the Name for 1394 Device screen will appear. Name the TV network and is powered On, the new device will device or use the default name that appears automatically.
  • Page 56 VCR. For example, if the IEEE 1394 device you have added is a Mitsubishi DVCR, and you have selected an analog connection as a second connection, then you will select Mitsubishi for the manufacturer.

  • Page 57: Menu

    Device Selection Menu When you press DEVICE on the TV's remote control, the Device Selection menu (Figure 7) displays. If NetCommand® has not been set up, the Device Selection menu allows you to select an input for viewing. If NetCommand is set up, the Device Selection menu allows you to select the device for viewing, select audio from the TV speakers or AiV receiver, power compatible...
  • Page 58 While CableCARD application screens are customized in each area, some general rules IR Controlled Devices apply in using these screens on your Mitsubishi television. For a NetCommand compatible traditional IR controlled device, pressing DEVICE MENU once or Blue text denotes a link to another screen. Press twice will display the menu for that device.
  • Page 59 Using the GUIDE Button to Display ChannelView TMand Menus The GUIDE Button Hease refer to the separate TV Guide On Screen® User's Guide for detaiHs about using the GUIDE button with TV Guide On Screen. When you are not using the GUIDE for the TV Guide screens, pressing GUIDE allows you to see NetCommand®...

  • Page 60: Recordings

    NetCommand®oControHed Recordings Setting up Recordings Recording Figure 13 Can be used when viewing Antenna 1 or 2, an IEEE 1394 Through NetCommand, you can automatically start and device, or a non-recording traditional device. stop recordings and send signaHs from one pHayback To initiate recording now: device to a recording device.
  • Page 61 Record List, Peer-to-Peer Connections PeerttooPeer Connections Record List Figure 14 A peePto-peer connection allows the IEEE 1394 devices Press GUIDE wMHeviewing the Record To screen to see a in your TV network to talk to each other without the Histof aH currently programmed recordings.
  • Page 62 Using A/V Discs Direct VCR Recording from an Antenna or Cable Source Copy-Protected Material and Restrictions for Traditional VCRs Using A/V Discs Direct VCR Recording from an Antenna or CabJe Source: A/V Disc Search NetCornmand is abHeto search to a specific time in a When your VCR is the recording device, pressing REC recording on an JEEE1394 AiV Disc.
  • Page 63 Main Menu ........Setup Menu ........NetCommand® Menu ........ Record Menu ........ChanneU Menu ........Captions Menu ........V-Chip Lock Menu ........Audio/Video Menu ........A/V Setting Descriptions: Audio ......A/V Setting Descriptions: Video ......

  • Page 64: Main Menu

    Main Menu ChanneJ Menu Setup Menu Figure 4 Figure 1 Edit channeHs for ANT-1 and ANT-2. After memorization, Use the Setup menu to seHect EngHish or Spanish as if a channeH dispHays as digital and analog, you can the Hanguage for the menus and on-screen dispHays. Memorize the avaiHabHe channeHs for antennas or came choose to see the channel digitally every time it is selected.

  • Page 65: Setup Menu

    Setup Menu Setup Menu Figure 8 After memorizing channels, the channels in memory can be accessed in ascending or descending order pressing CH _, or _'. Select the Channel Menu to access further channel-editing features such as channel add or delete, channel name, and SQV custom...

  • Page 66: Operations

    Setup Menu, continued Date Set Day Press ADJUST Akor V to seHect the correct date. Select the day or days that the TV will turn on automatically. Press ADJUST ,A or T to select Daily, Time Zone Mon-Fri (Monday through Friday), or the individual days of the week.

  • Page 67: Netcommand Menu

    NetCommand® Menu Transport Menu NetCommand Menu Figure 13 Figure 11 Figure 13. Transport Menu NetCommand uses the Transport menu to control VCRs, DVDs, IEEE 1394 AiV Discs, digital VCRs, and similar devices. If you choose to turn off this menu when viewing the devices, the transport buttons (rewind, play Figure 11.

  • Page 68: Record Menu

    Record Menu Record Figure 14 During the recording, the TV can be powered Of L The Record menu allows you to setup recordings, view To prevent recording of unwanted materiai whib the record iist and set defauits for your recording devbes. recording to a VCR or AiV disc, press PAUSE to temporariiy stop recording.
  • Page 69 Record Menu, continued Record List Aria Jog Recordings Figure 16 When you record a 16:9 digital channel to an analog VCR To see a iist of aHcurrently programmed recordings, sebct or recording device, there is a mismatch of the picture the record iist option on the Record menu or press GUIDE shape between the 16:9 ratio of the source and the whib viewing the Recording setup screen.

  • Page 70: Channeu Menu

    Channel Menu After the avaiiaMe channeis have been memorized with Figuye Memorize Channeis on the Setup menu, weaker channeis can be added or unwanted channeis can aiso be debted. Press CH _k or V on the remote controi to see the channeb in memory.
  • Page 71 Channel Menu, continued SQV (SuperQuickView SQV (SuperQuickView Using The Menu Screen Using The Remote Control Figure 17 Viewing and changing SQV banks using the remote SQV (SuperQuickView allows you to put together lists control: of your favorite channels from Antenna 1 and Antenna Press the SQV button.

  • Page 72: Captions Menu

    Captions Menu Captions Menu Figure 18 To make the anaiog dosed captions easier to read, you For anaiog channeb, broadcasters can send either can choose to dispiay the background coior as either Standard or Text dosed captioning. Standard Cbsed black or gray behind the captions. Captions follows the diaiogue of the characters on screen and dispiays in a small section of the screen.
  • Page 73 Captions Menu, continued Fonts Opacity (Font} You can customize the text of digitaH captions by You can customize the visibility of your fonts using the seHecfing the font of your choice. The avaiHabHe Font following categories: options are as foflows: Tranducent--TV program is faintly visible behind the text...

  • Page 74: V-Chip Lock Menu

    V-Chip Lock Menu To view a V-Chip bHocked program or to watch the SeHectV-Chip Lock to perform the functions Histed bellow. program during a scheduHed Hocktime, you must enter V-Chip allows you to BHock or AHow programs based your four-digit pass code or change the channel to an upon rating signaHs sent by the broadcaster.
  • Page 75 VoChip Lock Menu: VoChip Definitions V-Chip SignaJ Information When provided by the broadcaster, V-Chip ratings can be used to control which programs can be viewed or will be Mocked. When V-Chip ratings are sent, you will see the ratings when you change the channel or when you press the INFO button on the remote control Both TV and Movie ratings will display.
  • Page 76 V-Chip Lock Menu, continued Front Button Lock Lock By Time Figure Front Button Lock lets you disabHe controls on the front Lock by Time allows you to Hockthe entire TV during panel to prevent anyone from changing settings by specific hours. During the Lock Time, you must use your accident.

  • Page 77: Audio/Video Menu

    Audio/Video Menu TV Speakers Figure When an AiV receiver has not been set up in NetCommand, this seHection will turn the TV's internaH speakers on or of L You may seHect Off when sending the sound through a separate stereo system or surround sound AiV receiver.

  • Page 78: A/V Setting Descriptions: Audio

    A/V Setting Descriptions: Audio NOTE: The effects of the Audio Settings of Bass, Trebb, Baiance and Surround affect the sound heard through the TV speakers oniy. such as a sound track in a foreign language, Analog and Digital Audio Settings or unrelated to the program you are watching, A siider dispiays on screen for most settings.

  • Page 79: A/V Setting Descriptions: Video

    AiV Setting Descriptions: Video Video Settings PerfectOolor Press the VIDEO key repeatediy to cycb through Video Adjusts any or aii of six colors (Magenta, Red, Yellow, options to the one you want to change. Use ADJUST Green, Cyan and Blue) to create color balance. to change settings.
  • Page 80 A/V Setting Descriptions: Video, continued Auto Position Press ENTER to automaficaUy center the position of the PC video, This can be used whether the PC video is on the main or PIP screen_ HorizPosition (Horizontam Position} ManuaUy adjust the horizontaH position of the PC, either on the main or PIP screen.
  • Page 81 Additi Operation of PiP ........TV Display Formats ........PC Viewing ........PC Display Formats ......... MediaCommand and Media Card Playback ....

  • Page 82: Operation Of Pip

    Operation of PIP You can dispiay programs from anaiog channeis, anaiog inputs, or devices as Pbtureqn-Pbture (PIP). The TV has a second anaiog tuner for non-scramMed anaiog channeis received on ANT-1 and wiii dispiay them as the PIP sub- pictures. Digitai channeis and devices can be shown as the main picture but cannot be the sub-pbture.

  • Page 83: Tv Display Formats

    TV Display Formats This is a widescreen TV, arise known as a 16:9 TV. This shape reflects the new types of images avaiiabb from HDTV and many DVDs. There are still many eider styb narrow-screen images (caNed 4:3 aspect ratio) you win encounter. WhiNethere win never be a perfect soiufion for dispiaying a narrow image on a wide screen, MitsubisM offers severai dispiay formats from which to choose.

  • Page 84: Features

    TV Display Formats © © 0"-'-"0 Chapter 6. Additienal Features...

  • Page 85: Pc Viewing

    You will then be abHeto seHect the PC through the Device SeHecfion Menu. For the correct screen resoHution (pixeHs), use the PC's ControH PaneHsettings. Your Mitsubishi TV can dispHay resoHutions from standard VGA (640 x 480) through XGA 60-Hz refresh rates onHy. See Appendix B in this book for more screen resoHutions.

  • Page 86: Pc Display Formats

    PC Display Formats _;_u,_,_na, Format 4 X 3 Standard 16 X 9 Standard Original pis4elCounts 640 X 480 1696 × 960 1280 X 960 WVGA 848 X 480 1280 X 960 1696 X 960 SVGA 800 X 600 1702 X 960 1280 X 960 WSVGA 1064 X 600...

  • Page 87: Mediacommand

    MediaCommand TMand Media Card Playback Warning: Some media cards available on the market are not properly certified to follow the card type specifications noted below and cannot be used by the Card Reader. If you experience problems with the reading of your file, please...
  • Page 88 Media Command TMand Media Card Playback, continued NOTE: During MP3 or WMA7 audio playback, For MP3 or WMA7 Play list Menu: audio from the cards will be sent to the AiV Figure 4 receiver as analog audio. Digital out is not Press GUIDE to display the Play list menu.
  • Page 90 Room lighting may affect the signal. Havethe remotes very close (6 inches or i • less)to the TV during Learning. If using a Mitsubishi remote control, make sure slide switch is not set to TV position. Some, but not all, device keyfunctions can be learned by NetCommand. For j •...
  • Page 91 Troubleshooting, continued PossibJe SoJution There is a large black or gray rectangle on the The TV's analog closed captioning has been set to "text" mode in the Captions menu. Turnoff becausethere is no text information being broadcast. screen, You cannot see a picture when playing a VHS Displaythe DeviceSelection menu and select the correct VCR.
  • Page 92 Troubleshooting, continued PossibJe SoJution Devices are grayed out in the Device Selection * A recording is in progress requiring the use of RECORDOUTPUT jacks. Cancel menu or the PIP Selection menu. the recording to select the device. Digital channels and media cards cannot display in the PIR Cannot see the A/V Receiver menu.
  • Page 93 Troubleshooting, continued PossibJe SoJution All IEEE 1394 devices disappear. The connected devices must not be in a loop that returns to the T\t. Make sure a device is connected at the end. Disconnect all the cables and devices from the TV: Replace them one by one to locate the problem device or cable Use System Reset (front control panel).
  • Page 94 Troubleshooting, continued PossibJe SoJution The message "Lamp wiII soon exceed..." keeps * Reset the lamp reminder inthe setup menu. displaying after the lamp has been replaced. TV Guide On Screen@ system shows no program Program listings are downloaded while the TV is off and the cable listings.
  • Page 95 Appendix A: Bypassing the V-Chip Lock ....Appendix B: Specifications ......Appendix C: Remote Contro_ Programming Codes ...Appendix D: Device Control with NetCommand® ... Appendix E: NetCommand® SpeciaUized Device Keys ..Appendix F: On-Screen Information Displays ....Appendix G: Cleaning and Service ......

  • Page 97: The V-Chip Lock

    MENU button on the front paneHfor more than 8 seconds. iMPORTANT When changing or demeting your pass code, you must use the remote control included with this TV, You cannot use a Mitsubishi remote control from another component or a "universal" Appendices...
  • Page 98 This page intentionally bJank Appendices...
  • Page 99 Appendix B: From time to time, Mitsubishi may offer software updates to expand the features or operation of this TV. When these updates are avaiHabHe they win be announced on our web site, Mitsubishi-tv.com. If you return your Owner's registration card, with your modeH and seriaH number, you may receive written notification of avaiHabHe software updates.
  • Page 100 Mitsubishi D=VHS VORs are fully compatible with this TV in audio, video and control Many DV camcorders that have IEEE 1394 connections will be compatible with the control...
  • Page 101 Appendix C: Remote Control Programming Codes A/V Receivers IMPORTANT A/V Receiver Brand Code MITSUBISHI 010, 0!1,012, 013, 014 he remote control may return to its AIWA 225,226, nitial setting when the batteries BOSE B&K DENON 234, 235, 236, 245,246, 359,...
  • Page 102 Appendix C: Remote Control Programming Codes, VCRs CabMe Boxes, continued SCiENTiFiC ATLANTA 112, 113, 194 VCR Brand Code SIGNATURE 119,124,125,126,127,120,121,122 MITSUBISHI 001,060, 067,068_061,062,002 SLMARK 105,101 AKAI 049, 034, 035,036 SPRUCER AUDIO DYNAMIC STARCOM 119,124,125,126,127,120,121,122 BELL & HOWELL 025, STARGATE BROKSONIC...
  • Page 103 FFiFWD AiV receiver REWiREV Mitsubishi CD player PAUSE STOP If you have a Mitsubishi AiV receiver, the audio position DVD and Laser Disc Players may be used in conjunction with select Mitsubishi CD not all functions for all models) players.

  • Page 104: With Netcommand

    Appendix D: Device Controm with NetCommand® NetCommand Compatibme Traditionam Devices (Anamog) When Device Semection Menu is Dispmayed Device is Highmighted {Yellow Outmine) A/V RECEIVER CABLE BOX/SAT POWER Power On/Off Power On/Off Power On/Off Power On/Off (toggle) (toggle) (toggle) (toggle) GUmDE Changes Changes VCR inputs Changes antenna inputs (RCA...
  • Page 105 Appendix D: Device Control with NetCommand®, continued mEEE 1394 Devices When Device Selection Menu is Displayed and the Device is Highlighted (Yellow Outline) Device TUNER/ A/V DISC DVCR AMPUFIER CABLE BOX/ Remote Controm Butto_ POWER Power On/Off Power On/Off Power On/Off Power On/Off (toggle) (toggle)
  • Page 106 Appendix E: NetCommand® Specialized Device Keys CABLE LEARNING SCREEN FUNCTION NAME ON TV REMOTE RECEIVER or SAT CHECK BOX NAME Power* Power On or Power On/Off POWER** Power Off POWER** Power (Off)* Volume Up Volume Up VOL A Volume Down Volume Down VOL V MUTE...
  • Page 107 Appendix F: On-Screen Information Displays When you turn on the TV, change devices, change channels, or when you press the INFO button on the remote control the TV will dispUay the current status. BeUow are the most common dispUays. PRease note that seUdom or never do aH of the different status indicators appear...

  • Page 108: And Service

    DO NOT scrub or rub the TV harshly. Wipe it gently. Service If you are unable to correct a problem with your TV, consult your Mitsubishi dealer or a Mitsubishi Authorized Warranty Service Center. DO NOT adjust any controls other than those described in this Owner's Guide.

  • Page 109: Replacement

    TV Setup menu. Otherwise, the warning message will appear again too soon. Mitsubishi warrants the lamp for one (1) year from date of the original purchase at retail. It is likely, however, that the lamp will last significantly longer than this.
  • Page 110 Appendix H: Lamp Cartridge Rep(acement, continued BURN DANGER! During normal operation, the surfaces inside the TV near the (amp are extrenqeiy hot. TOUCH THE LAMP CARTRIDGE BY THE HANDLE ONLY Do not touch the glass parts of the (amp cartridge. 1.

  • Page 111: Information

    The TV Guide On Screen@ system is protected by one or more of the following issued United States patents: 6,498,895; 6,418,556; 6,331,877; 6,289,794; 6,154,203; 5,940,073; 4,908,713; 4,751,578; 4,706,121. XBox is a trademark of the Microsoft Corporation. MonitorLinW M, NetCommand@, ViewPoint@, QuickView SuperQuickView PerfectColor , MediaCommand ChanneIView are trademarks of Mitsubishi Digital Electronics America, Inc. Trademark and Licetlse hlfermatien...
  • Page 112 LICENSE GRANT. MDEA grants you a non-exclusive, non-transferable, limited right and license to use one copy of the Software only with the Mitsubishi television model that included this owner's guide and owned by you. RIGHTS AND UMBTATmONS.
  • Page 113 Device Selection Menu 57 Digital Audio Output Display Formats DTV Link A/V Discs 62 DVD..%e A/V Discs A/V Memory Reset..fW Reset DVD Player with Component Video A/V Receiver DVl Analog Audio Adding 45 DVl Device Connecting inputs 45 input Learn Screen 46 Front Button Lock Learn Screen 46 Front Control Panel 12...

  • Page 114: Specialized Device Keys

    Batteries Functions Media Cards Programming Media Card Slots 18 Programming Codes (reference chart) 101 Media Setup Menu 88 Transport Buttons Playback Reset Memorize Channels. @e Channels AiV (aii settings) Memory Card Slots 18, 87 A!V Memory (for individual devices) Mute DVCR Counter Audio 72, 107 Lamp Reminder 66...

  • Page 115: Projection Television Limited Warranty

    Embedded Software, the consumer is solely responsible for any replacement labor. For all other parts, we wiii provide the labor for a warranty repair by an authorized MITSUBISHI service center without charge for one (1) year from the original date of purchase at retail.
  • Page 116 Damage to thelenficular s creen or Fresnel lens,screen frame,cosmetic damage orto anyotherdamage where suchdamage is caused by unauthorized modification, alteration, repairs to or service oftheproductbyanyone other thananauthorized MITSUBISHI service center; p hysical a buse to or misuse oftheproduct(including anyfailure to carryoutanymaintenance as described intheOwner's Guideincluding airfiltercleaning or anyproductdamaged by excessive p hysical or electrical s tress);...
  • Page 118 _ECTRIC DIG|TAL TELEVIB|ON8 Website: www, rnitsubishi-tv, M DEAservice@mdea.corn To order repMacement additionaU remote controUs, Mamp cartridges or Owner's Guides, call For questions, call Consumer ReMations at 6) 2005 Mitsubishi Digital Electronics America, hc= Written and Printed in the U=S=A= 853B540B20...

This manual is also suitable for:

Mr.slim wd-62627

Table of Contents