Mitsubishi WD-57833 Owner's Manual page 13

2. TV Setup 13
Change the Menu Language
Choose to display on-screen menus in either English or
Spanish (EspaSol).
Select a menu language in the Setup menu.
5.
When memorization is complete you can:
• Press MENU once to return to the top row of icons.
Press MENU again to return to the Main menu.
Press EXIT to watch TV.
After channels have been memorized:
To tune to memorized channels, press OH/_/V
while watching TV on the ANT 1 or ANT 2 inputs.
Use the Setup > Edit menu for additional channel
options, such as adding or deleting channels from
memory, naming channels, and saving favorite
channels in custom memory banks.
1. With the Setup menu displayed, press _ to high-
light the Language icon.
2. Press A V to highlight either English or Spanish.
3. Press MENU to return the highlight to the top row of
icons.
Memorize Channels
For ANT l/MAIN and ANT 2/AUX
To start channel memorization
1. With the Setup menu displayed, press _ to high-
light the Scan icon.
2. Press ,A,V to highlight an input selection based on
your connections:
Ant 1 Air When connected to an indoor or
Ant 1 Cable
Ant 2 Cable
3.
4.
When connected to direct cable (no
cable box)
Press _ to highlight the on-screen START button.
Press ENTER to start automatic channel memoriza-
tion.
To stop channel memorization before
completion, press CANCEL.
Additional TV Setup Using the Setup Menu
See chapter 5, "TV Menu Settings," to:
= Edit channel options
Set the TV clock
Set the TV Timer
Select an Energy Mode to manage power use while
the TV is off.
= Select a lamp brightness mode
se,i.gupTv
When You First Connect a Device
This TV's Easy Connect
TM
Auto Input Sensing feature
detects most connections automatically. When you
first connect a device, the TV will:
a. detect the connected device
b. prompt you to identify the device type
c. prompt you to perform NetCommand set-up for
the device, if available
d. repeat these steps for any additional newly
detected devices
The tables below state which connections trigger Auto
Input Sensing.
iNPUT video jacks ANT 1 and ANT 2
COMPONENT video jacks
HDMI *
DiGiTAL AUDIO OUT
AVR AUDIO OUTPUT (analog)
USB (USB photo port on front)
* If the device is powered off when connected, detec-
tion occurs when the device is next powered on.
Note: For connection and setup of a personal com-
Start channel memorization from the Setup menu. puter, see the information later in this chapter.