Mitsubishi WD-57833 Owner's Manual page 44

44 5. TV Menu Settings
Use the Setup menu to:
• Select English or Spanish for menus and on-screen
text.
Scan the channels available for the antenna or cable
service connected to the ANT 1 or ANT 2 jacks.
Edit channel options, including channel locking.
Set the TV's internal clock.
Set the TV Timer to turn on the TV automatically at
a designated time.
Set the energy mode for power consumption when
the TV is powered off.
Set the TV Lamp Mode.
Setup menu, Scan option
English Display on-screen menus in either English or Spanish.
SpaniSh Note: To listen to audio in other languages (when available), see the section
Language on the AV menu, Audio submenu, and refer to either Listen To > SAP (analog
signal) or Language (digital signal).
i
Ant4 Air Scan memorizes broadcast channels to make them easier to find. To start
Ant=l Cable channel memorization:
_ Scan Ant=2 Air 1. Highlight one of the input selections based on your connection to ANT 1
Ant=2 Cable or ANT2:
•" Air when connected to an indoor or outdoor antenna.cable when connected to direct cable (no cable box)
2. Press _ to highlight START.
3. Press ENTER to start channel memorization for the selected input.
Notes on Scan and channel memorization: 3. Use the number keys and _ to enter the
• Channel memorization may take up to 15 minutes physical channel number followed by "-1" and
to complete.
e To stop channel memorization before completion,
press CANCEL ....
When watching TV, press OHA _' to move through
memorized channels.
• If you restart memorization, previously memorized
channels for the selected input will be erased.
®
ENTER. For example, for physical channel 36,
press
ENTER.
The TV will search for a digital channel on the
channel 36 frequency. When it finds the cnannel,
t will
a. Add the channel to memory.
To add a digital channel that does not appear in b.
the Edit menu without repeating channel memori-
zation:
1. Look up the physical channel number
for the new digital channel. The website
www.antennaweb.org can help you find the
physical channel number.
Change the channel number to the virtual
channel number sent by the broadcaster.
c. Add to memory any associated sub-chan-
nels.
o In the TV Guide On Screen system, the chan-
nels displayed and the order in which they are
displayed are independent of the TV's channel
2. Tune to any channel on the ANT 1 or ANT 2 memorization performed with Scan. Refer to the
input your antenna is connected to. TV Guide On Screen Interactive Program Guide
User's Manual for detailed instructions on editing
channels in the TV Guide On Screen system.