Mitsubishi WD-57833 Owner's Manual page 16

16
2. TV Setup
Using the TV with a Personal Com
Computer Video Adjustments
1.
2.
3.
.
8.
Power on the computer if it is not already on.
Select PC from the input Selection menu. To do
this, press iNPUT t o open the Input Selection menu,
move the highlight to the PC icon, and press ENTER.
Working from the computer, change the resolution
of the computer image. View the computer image
on the TV and maximize the computer resolution
while maintaining a suitable aspect ratio for the
image.
Perform TV video adjustments. Press f
Computer Display Formats
Press the FORMAT key repeatedly to cycle through the TV displays avail-
able for your computer's video signal.
VIDEO repeatedly to access video-
adjustment options. The following
additional adjustments are available
for computer video:
Horiz Position (Horizontal Position).
Manually adjust the horizontal
position.
Vert Position (Vertical Position).
Manually adjust the vertical position.
Press FORMAT repeatedly to find the
picture format best suited to the
image. See the chart on this page
showing how different computer reso-
lutions are displayed on the TV.
image Resolution
Your Mitsubishi TV can display resolutions
from standard VGA (640 x 480) through
1920 x 1080 signals at a refresh rate of 60
Hz. The resolution of 1920 x 1080 is sup-
ported at refresh rates of 24, 30, and 60
Hz. See Appendix A in this book for more
on compatible screen resolutions.
In most cases, the computer will select the
best resolution match to display on the TV.
You can override this setting if you wish.
Refer to your computer operating system's
instructions for information on changing
the screen resolution.
You may need to restart the computer for
changes to take effect.
VGA
640 X 480
SVGA
800 X 600
WSVGA
1064 X 600
........ x:68 ......................................... ................................ ,, ................
128o x1024
PC 1080p I
1920 X 1080 Z