Installing And Removing A Spa; Spa Installation And Removal - Cisco CRS-1 - Carrier Routing System Router Hardware Installation Manual

SPA Installation and Removal

Figure 6-1

SPA Installation and Removal

This section provides step-by-step instructions for installing and removing a SPA in a SIP.
Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
Figure 6-2
the SIP is not installed in the Cisco CRS-1 router.
Figure 6-2
Cisco CRS-1 Carrier Routing System SIP and SPA Hardware Installation Guide
6-2
Handling a SPA
Metal carrier
Printed circuit board
and Figure 6-3 illustrate how to install and remove a SPA in a Cisco CRS-1 SIP-800 when
Installing and Removing a SPA—Horizontal Orientation
Chapter 6

Installing and Removing a SPA

OL-17439-01