Sip And Spa Compatibility - Cisco ASR-1000-SIP10 Hardware Installation Manual

Chapter 1 SIP and SPA Product Overview
Table 1-1
SPA
4-Port Serial Interface SPA
8-Port Channelized T1/E1 Serial SPA
1-Port Channelized STM-1/OC-3 SPA
Table 1-2
SPA
4-Port and 8-Port Fast Ethernet SPA
1-Port 10-Gigabit Ethernet SPA
2-Port Gigabit Ethernet SPA
5-Port Gigabit Ethernet SPA
8-Port Gigabit Ethernet SPA
10-Port Gigabit Ethernet SPA
Table 1-3
SPA
1-Port OC-12c/STM-4 POS SPA
2-Port and 4-Port OC-3c/STM-1 POS SPA
2-Port and 4-Port OC-48c/STM-16
POS/RPR SPA
Modular Optics Compatibility
Some SPAs implement small form-factor pluggable (SFP) optical transceivers to provide network
connectivity. An SFP module is a transceiver device that mounts into the front panel to provide network
connectivity.
Cisco qualifies the SFP modules that can be used with SPAs.
The SPAs will only accept the SFP modules listed as supported in this document. An SFP module check
Note
is run every time an SFP module is inserted into a SPA and only SFP modules that pass this check will be
usable.
Table
for use with a SPA.
OL-14126-03
SIP and SPA Compatibility Table for Serial SPAs (continued)
SIP and SPA Compatibility Table for Ethernet SPAs
SIP and SPA Compatibility Table for Packet Over SONET SPAs
1-4, Table 1-5, Table 1-6, and
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
Product ID
SPA-4XT-Serial
SPA-8XCHT1/E1
SPA-1XCHSTM1/OC3 Yes
Product ID
SPA-4X1FE-TX-V2
SPA-8X1FE-TX-V2
SPA-1X10GE-L-V2
SPA-2X1GE-V2
SPA-5X1GE-V2
SPA-8X1GE-V2
SPA-10X1GE-V2
Product ID
SPA-1XOC12-POS
SPA-2XOC3-POS
SPA-4XOC3-POS
SPA-2XOC48-POS/RPR
SPA-4XOC48-POS/RPR
Table 1-7 show the types of optics modules that have been qualified
Modular Optics Compatibility
SIP Supported:
Cisco ASR1000-SIP10
Yes
Yes
SIP Supported:
Cisco ASR1000-SIP10
Yes
Yes
Yes
Yes
Yes
Yes
SIP Supported:
Cisco ASR1000-SIP10
Yes
Yes
Yes
1-3