1-Port Oc-192C/Stm-64 Pos/Rpr Xfp Spa Overview - Cisco CRS-1 - Carrier Routing System Router Hardware Installation Manual

1-Port OC-192c/STM-64 POS/RPR XFP SPA Overview

Table 3-11 OC-48 Specifications (continued)
Specification
RX overload
Maximum receiver power damage

1-Port OC-192c/STM-64 POS/RPR XFP SPA Overview

The 1-Port OC-192c/STM-64 POS/RPR XFP SPA is a single-height SPA that is installed in one SIP
subslot. The 1-Port OC-192c/STM-64 POS/RPR XFP SPA provides SONET and SDH network
connectivity with a bandwidth of 9.95 Gbps.
For more information about SPA bandwidth, see the "Bandwidth Oversubscription" section in this
chapter. For more information about SPAs and their compatibility with SIPs and modular optics, see the
product overview chapter in this guide.
The 1-Port OC-192c/STM-64 POS/RPR XFP SPA uses a 10-Gbps small form-factor pluggable optical
receptacle for each port allowing connection to single-mode optical fiber. For more information on the
optical fiber cables used with this SPA, see the
Transceiver Modules, Connectors, and Cables" section on page
The following sections describe the 1-Port OC-192c/STM-64 POS/RPR XFP SPA:
•
•
•
Cisco CRS-1 Carrier Routing System SIP and SPA Hardware Installation Guide
3-22
1-Port OC-192c/STM-64 POS/RPR XFP SPA LEDs, page 3-23
1-Port OC-192c/STM-64 POS/RPR XFP SPA Interface Specifications, page 3-24
1-Port OC-192c/STM-64 POS/RPR XFP SPA Optical Transceiver Modules, Connectors, and
Cables, page 3-24
Chapter 3 Overview: Cisco CRS-1 Shared Port Adapters
Description
OC-48 SR: –3 dBm
OC-48 IR-1: 0 dBm
OC-48 LR-2: –9 dBm
OC-48 SR: +5 dBm
OC-48 IR-1: +5 dBm
OC-48 LR-2: +5 dBm
"1-Port OC-192c/STM-64 POS/RPR XFP SPA Optical
3-24.
OL-17439-01