Leds; Physical Specifications - Cisco CRS-1 - Carrier Routing System Router Hardware Installation Manual

Cisco CRS-1 SIP-800 Overview

LEDs

The Cisco CRS-1 SIP-800 has one LED, as shown in
Figure 2-1
1
Table 2-2
Table 2-2
LED Label
—

Physical Specifications

Table 2-3
Table 2-3
Description
Physical dimensions
(H x W x D)
Weight
Shipping weight
Operating temperature
Storage temperature
Relative humidity
1. Short term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in one year. (This
Cisco CRS-1 Carrier Routing System SIP and SPA Hardware Installation Guide
2-2
Cisco CRS-1 SIP-800 Faceplate
Status LED
describes the Cisco CRS-1 SIP-800 LED.
Cisco CRS-1 SIP-800 LED
Color
Green
Amber
Off
shows the Cisco CRS-1 SIP-800 physical specifications.
Cisco CRS-1 SIP-800 Physical Specifications
refers to a total of 360 hours in any given year, but no more than 15 occurrences during that one-year period.)
Chapter 2
Figure
State Meaning
On The SIP is online and standing by.
On The SIP has failed and needs to be replaced.
Off The SIP is offline and deactivated.
Specifications
20.6 x 1.8 x 11.2 in. (52.32 x 4.57 x 28.4 cm)
Occupies one physical layer interface module (PLIM) slot on the
Cisco CRS-1 router
• Minimum, without any SPAs: 5.8 lb (2.6 kg)
• Maximum, with 6 SPAs: 15 lb (6.8 kg)
27 lb (12.25 kg)
Normal: 41 to 104°F (5 to 40°C)
•
1
Short term : 23 to 122°F (–5 to 50°C)
•
–40 to 158°F (–40 to 70°C)
Normal: 5 to 85%
•
1
Short term : 5 to 90% but not to exceed 0.024 kg of water per kg
•
of dry air
Overview: Cisco CRS-1 SPA Interface Processor
2-1.
1
OL-17439-01