Cisco CRS-1 - Carrier Routing System Router Hardware Installation Manual page 35

Chapter 3 Overview: Cisco CRS-1 Shared Port Adapters
Figure 3-6
The 1-Port Clear Channel OC-12 ATM SPA provides the following optical fiber options:
Multimode—622.08-Mbps, OC-12 optical fiber (SONET STS-12c or SDH STM-4)
•
Use a multimode optical fiber that has a core/cladding diameter of 62.5/125 microns.
Single-mode—622.08-Mbps, OC-12 optical fiber (SONET STS-12c or SDH STM-4)
•
Use a single-mode optical fiber that has a modal-field diameter of 8.7 ±0.5 microns. (Nominal
diameter is approximately 10/125 microns.)
For single-mode and multimode optical fiber connections, you can use either a duplex LC-type cable (see
Figure
Figure 3-7
OL-17439-01
SFP Optics Module
3-7) or two simplex LC-type cables, one for transmit (TX) and one for receive (RX).
Duplex Patch Cable with LC-Type Connectors
RX TX
Cisco CRS-1 Carrier Routing System SIP and SPA Hardware Installation Guide
1-Port Clear Channel OC-12 ATM SPA Overview
/ /
/ / / /
3-9