Sip And Spa Compatibility; Timing, Communication, And Control Plus Card - Cisco Universal Broadband Router uBR10012 Hardware Installation Manual

Cisco uBR10012 Universal Broadband Router Modules

SIP and SPA Compatibility

The Cisco uBR10012 router currently supports the following SIPs:
•
•
The Cisco Wideband SIP can support up to two Cisco Wideband SPAs. The Cisco uBR10012 router can
support up to six SPAs. For more information about the introduction of support for different SIPs and
SPAs, refer to the Cisco uBR10012 Universal Broadband Router SIP and SPA Software Configuration
Guide at the following location:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/ubr10012/1
2.3_23_bc/sipsp_d3.html

Timing, Communication, and Control Plus Card

On the Cisco uBR10012 router, the Timing, Communication, and Control Plus (TCC+) card acts as a
secondary processor that performs the following functions:
•
•
•
•
•
•
When two TCC+ cards are installed, they are configured as active and backup (redundant). If the TCC+
card in the first slot is working at system power-up, it automatically becomes the active card and the
TCC+ card in the second slot becomes the backup card. The TCC+ cards monitor each other's priority
information so that if the active card fails, the active card role is transferred to the redundant backup card
without lose of data.
Figure 1-13
the card from the chassis.
Do not attempt to lift the chassis using one of these handles.
Caution
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
1-24
Cisco Wideband SIP for the Cisco Wideband SPA
Cisco 10000 Series SPA Interface Processor-600
Generates and distributes 10.24 MHz clock references to each of the cable interface line cards.
Generates and distributes 32-bit time-stamp references to each of the cable interface line cards.
Allows software to power off independently any or all of the cable interface line cards.
Drives the LCD module used to display system configuration and status information.
Monitors the supply power used by the chassis.
Provides two redundant RJ-45 ports for external timing clock reference inputs such as a Global
Positioning System (GPS) or building integrated timing supplies (BITS) clock.
shows the faceplate of the TCC+ card. The handle provides for the insertion and removal of
Chapter 1 Cisco uBR10012 Universal Broadband Router Overview
OL-18259-09