NEC Storage Manager Messages Handbook page 90

iSM07025: Resource monitoring stopped for
configuration. (<aaa...a>
productID=<bbbbb> SN=<ccccc>)
[Classification] INFO
[Explanation] It indicates that state monitoring to disk array (name: aaa...a) has been stopped
with the start of configuration setting.
aaa...a
bbbbb
ccccc
[Measures] Start monitoring if necessary after configuration setting is complete. Restart
can be selected also.
iSM07026: Resource monitoring changes to
recovery mode.(<aaa...a>
productID=<bbbbb> SN=<ccccc>)
[UC=<dddddddddd> FC=<ee>]
[Classification] ERROR
[Explanation] It indicates that the monitoring for the disk array (Name: aaa...a) became
impossible to continue due to disk array failure or control path failure, and the
system is turned into the monitoring recovery waiting status.
aaa...a
bbbbb
ccccc
dddddddddd/ee : Maintenance information
[Measures] Monitoring will be restarted automatically if the failure is a temporary failure.
Take appropriate measures if monitoring will not restart automatically even after
waiting for a while. There may be a permanent failure for control path.
: Disk array name
: Product ID of disk array (for example, S2100 Disk Array etc.)
: Serial number of disk array
: Disk array name
: Product ID of disk array (for example, S2100 Disk Array etc.)
: Serial number of disk array
85
Chapter 2 Message List