NEC Storage Manager Messages Handbook page 56

iSM03224: Control path is blockaded.
disk=(disk<aaa> (Port<bbb>
Bus<ccc> Target<ddd> Lun<eee>))
func=<fff...f> errno=<ggggg>
status=<hhh...h> (<iii...i>
productID=<jjjjj> SN=<kkkkk>)
[UC=<llllllll> FC=<mm>]
[Classification] ERROR
[Explanation] The control path (disk access) was blockaded.
This message is output on Windows system.
diskaaa (Portbbb Busccc Targetddd Luneee): Disk information
fff...f
ggggg
hhh...h
iii...i
jjjjj
kkkkk
llllllll/mm
[Measures] Check the status of the disk array, and remove the cause of failure.
: Function number
: Error number
: Result of issuing of SCSI command
: Disk array name
: Product ID of disk array (for example, S2100 Disk Array etc.)
: Serial number of disk array
: Maintenance information
51
Chapter 2 Message List